PDA

View Full Version : Post your CPU-Z Overclocked


Pages : 1 [2] 3 4 5 6 7

Leandros
09-25-2006, 04:02 AM
http://valid.x86-secret.com/show_oc?id=124078
Does this get me in the Top 5 of Celeron first gen?

faLLeN
09-25-2006, 04:16 AM
Originally posted by Leandros
http://valid.x86-secret.com/show_oc?id=124078
Does this get me in the Top 5 of Celeron first gen?

Socket 370?

LOL! Haven't seen one of those in like... 5 years!

Rafiq_kassam1
09-25-2006, 08:44 AM
Originally posted by Rafiq_kassam1
Well how would you guys want me to set it up?

Rafiq_kassam1
09-25-2006, 06:30 PM
Guys, I would really like to know how you guys want me to setup this thread. How would you like me to set it up. What catagories would you like to see/prefer ect.

Thanks.

btw: Can you guys help me find the highest:

AMD 64 X2 Dual Core
AMD 64 Single Core
Intel Pentium D
Intel Pentium 4

Overclocks in this thread. It would help me a lot.

Thanks.

cs-hl_addictz
09-25-2006, 06:41 PM
I would like to see everyone's cpu oc, not only the top 5, this is totally up to you though, easier for us so we dont have to scan through each page finding everyone's cpuz scores

Rafiq_kassam1
09-25-2006, 06:42 PM
Should I have everyones overclock posted and under it will be the top 5 ect....?

TokyoLife
09-25-2006, 06:47 PM
for each processor type section, put the top 5 ocers and then put everyones scorees underneath, heck doesnt really matter your way is good also, main thing is I would like to see everyone's scores on the front page ^^

Rafiq_kassam1
09-25-2006, 06:48 PM
Okay good idea, but I won't do this until I get more opinions.

Thanks.

T Rush
09-25-2006, 06:59 PM
sounds like a lot of work...but i guess it could be done(up-dating the OP to show all the Steam forum members OC's)


I would make it really clear(if I had to do all that) that they say when you have your final highest over clock that you want posted
...and not one day have your CPU at a mild 200MHz overclock, and then the next day go for alittle more up another 50MHz and want your score updated on the OP, and then the next another 100MHz and again want the score up-dated...etc....etc...


have people confirm that this is where they have maxed out their overclock, and is what they want on the OP

JamezKangzta
09-25-2006, 07:01 PM
well you dont see them posting again after they posted once

Hwkiller
09-25-2006, 07:01 PM
Originally posted by T Rush
sounds like a lot of work...but i guess it could be done(up-dating the OP to show all the Steam forum members OC's)


I would make it really clear(if I had to do all that) that say when you have your final highest over clock that you want posted
...and not one day have your CPU at a mild 200MHz overclock, and then the next day go for alittle more up another 50MHz and want your score updated on the OP, and then the next another 100MHz and again want the score up-dated


have people confirm that this is where they have maxed out their overclock, and is what they want on the OP

On air cooling, I have 2.6ghz on an orleans 3500+ (2.2 stock)... if it's doing fine heat-wise, is it possible to up the vcore and oc it some more without it getting too hot?

T Rush
09-25-2006, 07:02 PM
yes

Hwkiller
09-25-2006, 07:03 PM
Originally posted by T Rush
yes

How much does voltage-raising increase temperature?

T Rush
09-25-2006, 07:03 PM
alittle

Hwkiller
09-25-2006, 07:06 PM
Originally posted by T Rush
alittle

Right now, this is my speedfan stats:

temp1 33
temp2 39
temp3 46
HD0 33
Core 39

Vcore-1.35v (ranges to 1.38v it seems)

Do you recommend going for 2.8? You think it'll make temp. too hot? And... lastly, how much do you raise the voltage normally?

Rafiq_kassam1
09-25-2006, 07:09 PM
Originally posted by T Rush
sounds like a lot of work...but i guess it could be done(up-dating the OP to show all the Steam forum members OC's)


I would make it really clear(if I had to do all that) that they say when you have your final highest over clock that you want posted
...and not one day have your CPU at a mild 200MHz overclock, and then the next day go for alittle more up another 50MHz and want your score updated on the OP, and then the next another 100MHz and again want the score up-dated...etc....etc...


have people confirm that this is where they have maxed out their overclock, and is what they want on the OP

I know it's hard work, but I will try my best.

BTW: T rush do you have any opinions on how I should setup the catagories specifically?

RedRumy3
09-25-2006, 07:12 PM
still testing so far thats stock volts. my scythe heatsink is coming wednesday to replace stock heatpipe amd cooler. this is a 89w version x2 4400


right now im @ 260 x 10 stock volts. seems like if i use 11 multi it needs alot more voltage to be orthos stable

250 x 10
http://valid.x86-secret.com/show_oc?id=124458

T Rush
09-25-2006, 07:18 PM
Originally posted by hwkiller
Right now, this is my speedfan stats:

temp1 33
temp2 39
temp3 46
HD0 33
Core 39

Vcore-1.35v (ranges to 1.38v it seems)

Do you recommend going for 2.8? You think it'll make temp. too hot? And... lastly, how much do you raise the voltage normally?

yeah, 2.6GHz is not a bad overclock for a single core AMD64 at all

seemed like the old 130nm NewCastle core CPUs were able to hit about 2.5GHz
..and the first 90nm Winchesters safely up to 2.6GHz
...then the Venice was going fine at 2.7GHz
...now the Orleans has pushed it higher to 2.8GHz

now of course some people were able to get each of those cores higher, depending on how much they over volted and what cooling they were using


but "how much to raise the voltage"?
...what I do is run benchmark test and just kinda 'play' with it all, seeing what the lowest amount of voltage is needed for each speed to keep something like the 4 game tests(turn off the others) in 3Dmark01 SE (http://www.futuremark.com/download/3dmark2001/) from crashing....when I find that point, I go back to the last voltage that worked, and then try it with alittle higher CPU speed, and see if more voltage is needed or not, if not I'll go alittle faster on the CPU and see if I need more voltage or not, ...sooner or later you will start to reach a point when heat is an issue

Hwkiller
09-25-2006, 07:20 PM
Originally posted by T Rush
yeah, 2.6GHz is not a bad overclock for a single core AMD64 at all

seemed like the old 130nm NewCastle core CPUs were able to hit about 2.5GHz
..and the first 90nm Winchesters safely up to 2.6GHz
...then the Venice was going fine at 2.7GHz
...now the Orleans has pushed it higher to 2.8GHz

now of course some people were able to get each of those cores higher, depending on how much they over volted and what cooling they were using


but "how much to raise the voltage"?
...what I do is run benchmark test and just kinda 'play' with it all, seeing what the lowest amount of voltage is needed for each speed to keep something like the 4 game test in 3Dmark01 SE from crashing....when I find that point, I go back to the last voltage that worked, and then try it with alittle higher CPU speed, and see if more voltage is needed or not, if not I'll go alittle faster on the CPU and see if I need more voltage or not, ...sooner or later you will start to reach a point when heat is an issue

Ok then.. how high should I NOT go, I know nothing about voltages really... is 1V too high? I'd say so.

T Rush
09-25-2006, 07:29 PM
Originally posted by Rafiq_kassam1
I know it's hard work, but I will try my best.

BTW: T rush do you have any opinions on how I should setup the catagories specifically?

if you are going to try to list all Steam Forum Members highest overclocks
...I would say to just stick with what you have here: Originally posted by Rafiq_kassam1

Top 5 "Highest" Overclock


Intel Core 2 Duo/Extreme

AMD 64 X2 Dual Core

AMD 64 Single Core

Intel Pentium D

Intel Pentium 4

....at most, if not everyone could fit into one of those 5 groups
..you could add a 6th group just called "Other CPUs"

but I still think it might be cool to see "highest RAM or bus speeds"

Rafiq_kassam1
09-25-2006, 07:31 PM
Originally posted by T Rush
if you are going to try to list all Steam Forum Members highest overclocks
...I would say to just stick with what you have here: ....at most, if not everyone could fit into one of those 5 groups
..you could add a 6th group just called "Other CPUs"

but I still think it might be cool to see "highest RAM or bus speeds"

Okay then I keep it as I have, and I think it's a good Idea to have highest RAM or bus speeds", well do it in a few minutes.

So I should not list all the overclocks right?

T Rush
09-25-2006, 07:36 PM
Originally posted by hwkiller
Do you recommend going for 2.8? You think it'll make temp. too hot? And... lastly, how much do you raise the voltage normally?

yeah, sure, go for 2.8GHz....I would say that depending on your cooling at about 1.55vcore your CPU might get too warm

just go until the 4 game tests(turn off the others) in 3Dmark01 SE (http://www.futuremark.com/download/3dmark2001/) will still run....either the CPU will get too hot(from too much voltage) and cash the game tests, or the CPU speed will just be too high to run without errors



Originally posted by Rafiq_kassam1
So I should not list all the overclocks right?
...well, that would be very nice of you to do all that work

Rafiq_kassam1
09-25-2006, 07:40 PM
Originally posted by T Rush

...well, that would be very nice of you to do all that work

Well I try and see how it goes.

T Rush
09-25-2006, 07:46 PM
hmm, I guess that means I'll have to see if I can get my socket 754 ClawHammer over 2.75GHz again (:( I know some one will beat me, but if your going to post everyone I might as well try to get a good high OC)

I also know that I can get my kids 630 Intel P4(3.0GHz stock) over 4GHz...so I can do that one too

Hwkiller
09-25-2006, 07:47 PM
APPARENTLY, I can't change the vcore (I can't find it anywhere)...

Same with my multiplier, my nforce 550 doesn't have the option to drop it :(.

RedRumy3
09-25-2006, 07:47 PM
Originally posted by T Rush
hmm, I guess that means I'll have to see if I can get my socket 754 ClawHammer over 2.75GHz again (:( I know some one will beat me, but if your going to post everyone I might as well try to get a good high OC)

I also know that I can get my kids 630 Intel P4(3.0GHz stock) over 4GHz...so I can do that one too

my 3700+ skt 939 did 2.8 stock volts :)

but i moved on to a x2 4400+ and putting the 3700+ in sister rig :)

T Rush
09-25-2006, 07:53 PM
Originally posted by hwkiller
APPARENTLY, I can't change the vcore (I can't find it anywhere)...

Same with my multiplier, my nforce 550 doesn't have the option to drop it :(.

is it the MSI K9N Neo-F motherboard?
http://www.newegg.com/Product/Product.asp?Item=N82E16813130050

Hwkiller
09-25-2006, 07:54 PM
Originally posted by T Rush
is it the MSI K9N Neo-F motherboard?
http://www.newegg.com/Product/Product.asp?Item=N82E16813130050

Yeppers

T Rush
09-25-2006, 07:56 PM
Originally posted by hwkiller
Yeppers

try "nTune"...tell me if that works
http://www.nvidia.com/object/ntune_5.00.11.06.html

Hwkiller
09-25-2006, 07:57 PM
Originally posted by T Rush
try "nTune"...tell me if that works
http://www.nvidia.com/object/ntune_5.00.11.06.html

I've used that before, but only to verify that I couldnt change the multiplier..

but I'll check for vcore.

Hwkiller
09-25-2006, 08:04 PM
Nope, won't let me...

but does ntune's 'fine tuning' (auto-overclocks it I believe) do any good? I want to see what it comes up with...

AND, if I were to do that, could I just restore all defaults and be back to normal (in bios)?

ÁR╝
09-26-2006, 12:18 AM
Originally posted by hwkiller
Nope, won't let me...

but does ntune's 'fine tuning' (auto-overclocks it I believe) do any good? I want to see what it comes up with...

AND, if I were to do that, could I just restore all defaults and be back to normal (in bios)? itset my RAM timing to a really massive number...

crazy # 1-3-4-4...i don't see how that would have worked...

but it never recovered from the ram rashing...becuase the test takes a while to do...

Beer_N_Cookies
09-26-2006, 05:19 AM
We also need to point out whether the person has watercooling or not. Just to keep things a bit fair.

Dala-Jay*
09-26-2006, 05:34 AM
Could we have a stock (as in settings and cooler), air, water and extreme?

Kidfinger
09-26-2006, 02:11 PM
Originally posted by Dala-Jay*
Could we have a stock (as in settings and cooler), air, water and extreme?

Something along the same lines, Maybe you could put what the top 5 are using to cool thier CPU's with.?.

rotNdude
09-26-2006, 02:19 PM
Does this count?

http://tinypic.com/j77rbp.jpg

From here:

http://forums.steampowered.com/forums/showthread.php?s=&threadid=427778

I since put the P4 660 in my son's computer and don't have the water on it anymore nor the XP90C. :(

T Rush
09-26-2006, 02:29 PM
hmmm, I wonder who's kid's computer we can overclock the furthest now?

DFI LanParty 925-T2
630 3.0Ghz 2mb L2 P4
ZALMAN 7000 w/ fan from stock Intel heatsink
1GB (2X 512mb) Geil DDR2-533 3-3-3-8
X800XL

http://i3.tinypic.com/vy8jmq.jpg

xero273
09-26-2006, 02:32 PM
Originally posted by T Rush
hmmm, I wonder who's kid's computer we can overclock the furthest now?

DFI LanParty 925-T2
630 3.0Ghz 2mb L2 P4
ZALMAN 7000 w/ fan from stock Intel heatsink
1GB (2X 512mb) Geil DDR2-533 3-3-3-8
X800XL

http://i3.tinypic.com/vy8jmq.jpg

You forgot the orange PSU.

T Rush
09-26-2006, 02:37 PM
when I first built that computer...I used the 'free PSU' that came with the case...and painted the PSU orange
http://i3.tinypic.com/vy8dg5.jpg

but yeah, maybe 'the next up-grade' I'll do to it, and get the PC P&C orange PSU

...still waiting for ASUS to make a X1900 card with an orange PCB

rotNdude
09-26-2006, 02:38 PM
Originally posted by T Rush
http://i3.tinypic.com/vy8jmq.jpg

Oh no! The orange beast! ;)

Hmmm, P4 660 with Intel stock cooling. Time to rock 'n roll. :D

Hwkiller
09-26-2006, 02:39 PM
Originally posted by ÁR╝
itset my RAM timing to a really massive number...

crazy # 1-3-4-4...i don't see how that would have worked...

but it never recovered from the ram rashing...becuase the test takes a while to do...

So... if I don't like what it changes stuff to, I can reset my defaults in the bios, and it'll be back to normal..RIGHT?

(referring to Ntune's 'tuning'utility)

CyBeRkIlLeR
09-28-2006, 03:00 PM
http://valid.x86-secret.com/show_oc?id=125493

UR14
09-28-2006, 03:03 PM
i'm like the only one with a AMD FX....

hmm...

dracolnyte
09-28-2006, 03:30 PM
http://valid.x86-secret.com/show_oc?id=125500

i think i should be recognized as the highest amd single core HTT...

dracolnyte
09-28-2006, 04:05 PM
correction: http://valid.x86-secret.com/show_oc?id=125504
now thats my highest HTT + OC, i think i should be in third place now for highest single oc...

Hwkiller
09-28-2006, 04:07 PM
correction: http://valid.x86-secret.com/show_oc?id=125504
now thats my highest HTT + OC, i think i should be in third place now for highest single oc...

I could get mine to somewhere around 2.75 or so... I could get it HIGHER if my friken mobo would allow me to raise my vcore. :(

Rafiq_kassam1
09-28-2006, 04:11 PM
Okay I update it just give me a sec.

dracolnyte
09-28-2006, 04:14 PM
thanks ;) thanks

Rafiq_kassam1
09-28-2006, 04:19 PM
Man the new interfance made all the fonts bigger.

dracolnyte
09-28-2006, 04:23 PM
you made a mistake on redrumy3's cpuz, http://valid.x86-secret.com/show_oc?id=124458
it says 2.5GHz, you have put 2.6GHz. and for some odd reason, the last 2 guys on the single cpu oc list, their links dont work

Rafiq_kassam1
09-28-2006, 04:31 PM
Thanks for telling me, I am fixing it.

btw: How do you change font?

TokyoLife
09-28-2006, 04:37 PM
very nice rafiq thanks, now I can check all cpuz results on the front much more convenient

Rafiq_kassam1
09-28-2006, 05:01 PM
http://valid.x86-secret.com/show_oc?id=125500

i think i should be recognized as the highest amd single core HTT...

I will add a highest HTT section soon.

Tw33ter
09-28-2006, 05:16 PM
Tw33ter

AMD Mobile Athlon 64 4000+ Newark 2.6GHz @ 3.0 GHz (334.11 x 9)

http://valid.x86-secret.com/show_oc?id=99218

silentz
09-28-2006, 06:47 PM
AMD Athalon 2600 XP at 1.9 GHz

I got no idea what im doing btw

http://valid.x86-secret.com/show_oc?id=125531

micromartyaka
09-28-2006, 07:03 PM
AMD 64 3800+ Orleans AMD2 2.4Ghz-2.7Ghz
http://valid.x86-secret.com/show_oc?id=125535

xero273
09-28-2006, 07:10 PM
AMD Athalon 2600 XP at 1.9 GHz

I got no idea what im doing btw

http://valid.x86-secret.com/show_oc?id=125531

1.9GHz is the default speed for the AthlonXP 2600+

silentz
09-28-2006, 07:12 PM
Haha ya... I don't think I should be overclocking it ;)

TokyoLife
09-28-2006, 07:14 PM
:rolleyes:

silentz
09-28-2006, 07:15 PM
Haha these guys overclocked it to 2.4ghz

http://www.aceshardware.com/read.jsp?id=50000288

Rafiq_kassam1
09-28-2006, 07:53 PM
holy ♥♥♥♥, you really want me to verify? i've had this pic since august 2nd

EDIT:

notice the link, it links to DEMONITHESE photobucket =/

http://i3.photobucket.com/albums/y56/Demonithese/august2ndoverclock.jpg
proof how cool i am (http://i3.photobucket.com/albums/y56/Demonithese/boondock.jpg)

If it's not cpu-z validated them me not putting it on list.

Rafiq_kassam1
09-28-2006, 08:18 PM
Man it takes a hell of alot of time to find everyones cpu-z and catorgize them.

btw: Should I add a mobile cpu section?

micromartyaka
09-28-2006, 08:21 PM
Do I get on for my amd 64 @ 2.7Ghz?

Rafiq_kassam1
09-28-2006, 08:22 PM
Do I get on for my amd 64 @ 2.7Ghz?

It's already there. :D

TokyoLife
09-28-2006, 08:44 PM
hey you forgot gordons post rafiq ;)

Rafiq_kassam1
09-28-2006, 08:48 PM
hey you forgot gordons post rafiq ;)

Where???? (too short) lol

TokyoLife
09-28-2006, 08:56 PM
Where???? (too short) lol

haha, the first post beside yours, here http://valid.x86-secret.com/show_oc?id=99291

Rafiq_kassam1
09-28-2006, 08:59 PM
haha, the first post beside yours, here http://valid.x86-secret.com/show_oc?id=99291

Okay I added it.

Thanks.

TokyoLife
09-28-2006, 09:07 PM
Oh also metalheads http://valid.x86-secret.com/show_oc?id=92774 possible for the top 5 amd x2 oc

Rafiq_kassam1
09-28-2006, 09:09 PM
Oh also metalheads http://valid.x86-secret.com/show_oc?id=92774

Should that be in a new coloum or just in amd x2 coloum?

TokyoLife
09-28-2006, 09:13 PM
amd x2 column

Tw33ter
09-28-2006, 09:43 PM
Man it takes a hell of alot of time to find everyones cpu-z and catorgize them.

btw: Should I add a mobile cpu section?


The mobiles (or at least the dtr's) work without any special bios or anything. You just put them in and set the multi and stuff up manually just like with any other cpu, so I wouldn't think so since there's not any different between the mobile versions of the a64's and the desktop versions other then the mobile's default to 800mhz the first time you boot them up.

mca7
09-28-2006, 09:52 PM
Nothing special...it was higher but I took it down...
http://valid.x86-secret.com/show_oc?id=125562

micromartyaka
09-29-2006, 02:50 PM
THanks for putting me on there.

Rafiq_kassam1
09-29-2006, 03:24 PM
THanks for putting me on there.

np. Well it deserves to be there. It's a pretty good overclock for an x2.

Dala-Jay*
09-29-2006, 04:09 PM
http://valid.x86-secret.com/show_oc?id=125772

Not alot higher, will try again in a mo

(Temps aren't pretty)

Rafiq_kassam1
09-29-2006, 04:12 PM
http://valid.x86-secret.com/show_oc?id=125772

Not alot higher, will try again in a mo

(Temps aren't pretty)

Okay I will update it.

BTW: Get some watercooling. :D

MuzoEdge
09-29-2006, 04:18 PM
http://valid.x86-secret.com/show_oc?id=123428
2.0ghz stock, 0.69ghz OC (Total 2.69ghz, Was hopping around 2.7), Was the F11 bios for my mobo that helped the most. Aircooled, No significant temp rise (oddly). Gratz to DalateJC for his future submission of a 4.00ghz OC on air (E6600).

AdamEW
09-29-2006, 04:21 PM
Amd Athlon 64 3200+ (939)(2.0ghz) @ 2.7ghz

http://valid.x86-secret.com/show_oc?id=125777

Hwkiller
09-29-2006, 04:23 PM
Amd Athlon 64 3200+ (939)(2.0ghz) @ 2.7ghz

http://valid.x86-secret.com/show_oc?id=125777

Wow! nice!

Rafiq_kassam1
09-29-2006, 04:27 PM
Amd Athlon 64 3200+ (939)(2.0ghz) @ 2.7ghz

http://valid.x86-secret.com/show_oc?id=125777

Added......

Dala-Jay*
09-29-2006, 04:35 PM
Eek, tried for 3.93Ghz But didn't feel too safe at 1.6Vcore :P Gonna check my chip for concaveness tommorow, and if it is, wonder what to do about it :D

dracolnyte
09-29-2006, 04:53 PM
dude, what happened to my name? http://valid.x86-secret.com/show_oc?id=125504
2.72GHz, 1360MHz HTT

Rafiq_kassam1
09-29-2006, 04:56 PM
dude, what happened to my name? http://valid.x86-secret.com/show_oc?id=125504
2.72GHz, 1360MHz HTT

I don't know what you mean, but I added you if that's what you are saying. (Confused) :|

dracolnyte
09-29-2006, 04:57 PM
but i dont see my self on anywhere, not even on the top 5

Rafiq_kassam1
09-29-2006, 04:58 PM
but i dont see my self on anywhere, not even on the top 5

Cheak again.

Hwkiller
09-29-2006, 04:59 PM
AMD 64 Single Core

AMD Athlon 64 2.2 Ghz @ 2.91 Ghz ~James~
AMD Athlon 64 2.4 Ghz @ 2.77 Ghz ~Beer_N_Cookies~
AMD Athlon 64 2.4 Ghz @ 2.72 Ghz ~dracolnyte~ <<----
AMD Athlon 64 2.4 Ghz @ 2.71 Ghz ~AdamEW~
AMD Athlon 64 2.4 Ghz @ 2.70 Ghz ~Rafiq_kassam1~

dracolnyte
09-29-2006, 04:59 PM
alright, now i see it, thanks

Rafiq_kassam1
09-29-2006, 05:12 PM
Tonjohn don't you have like a e6600? Have you overclocked it yet?

rotNdude
09-29-2006, 05:26 PM
Tonjohn don't you have like a e6600? Have you overclocked it yet?

tonjohn hasn't posted in this thread. Why don't you PM him?

Rafiq_kassam1
09-29-2006, 05:27 PM
tonjohn hasn't posted in this thread. Why don't you PM him?

Okay I will.

BTK
09-29-2006, 05:32 PM
aww I was added :( I did mine as a joke. I UNDERCLOCKED mine from 2 GHZ. I just booted up my old P4 system

pff

http://valid.x86-secret.com/show_oc?id=122336

Rafiq_kassam1
09-29-2006, 05:36 PM
aww I was added :( I did mine as a joke. I UNDERCLOCKED mine from 2 GHZ. I just booted up my old P4 system

pff

http://valid.x86-secret.com/show_oc?id=122336

Okay thanks for telling me. I will take your off from the list.

BTK
09-29-2006, 07:12 PM
Okay thanks for telling me. I will take your off from the list.

It was so emberassing up there

xelink
09-29-2006, 07:16 PM
umm

youre world records are slightly off..

http://xtremesystems.org/forums/showthread.php?t=59753
INTEL

Conroe/Kentsfield

Conroe:
X6800: coolaler - 5525.89 MHz http://www.iamxtreme.net/coolaler/WR...526_9000S_cpuz
E6700: bunnywk - 5142.43 MHz http://www16.big.or.jp/~bunnywk/pi/C...iMod1M-LN2.png
E6600: Misteroadster - 5103.3Mhz http://valid.x86-secret.com/show_oc.php?id=112009
E6400: Boblemagnifique - 4224.1Mhz http://valid.x86-secret.com/show_oc.php?id=111783
E6300: Misteroadster - 3893.1Mhz http://valid.x86-secret.com/show_oc.php?id=112754

Kentsfield:
E6700: Stoolman - 4648.66 MHz http://valid.x86-secret.com/show_oc.php?id=108960
E6600: coolaler - 3200.28 MHz http://valid.x86-secret.com/show_oc.php?id=101261

Dothan/Merom/Yonah:

Dothan:
Dothan 780: hipro5 - 4390MHz - http://www.xtremesystems.org/forums/...&postcount=263
Dothan 770: k|ngp|n - 3672.59 MHz http://valid.x86-secret.com/show_oc.php?id=25235
Dothan 760: Waus-mod - 3600mhz http://valid.x86-secret.com/show_oc.php?id=69946
Dothan 750: Kaz-n - 3901.07 MHz http://u-san.net/c-board/file/14-278.65-CPUMark-320.JPG
Dothan 745: Shamino - 3318.12MHz - http://valid.x86-secret.com/show_oc.php?id=4104
Dothan 740: NewBeetle - 3660,6 MHz http://www.vr-zone.com/ocdb/data.php...l_or_amd=intel
Dothan 735: Master_of_Dremel - 2816.53MHz http://valid.x86-secret.com/show_oc.php?id=105649
Dothan 730: macci - 3450.60 MHz http://www.akiba-pc.com/d16g/d16g345g.gif
Dothan 715: dothan - 2704.82 MHz http://valid.x86-secret.com/show_oc.php?id=7840
Dothan 710: -Acid- - 2631.6 MHz http://valid.x86-secret.com/show_oc?id=89638

Merom:
T7400: coolaler - 3655.38 MHz http://www.xtremesystems.org/forums/...postcount=1009
T7200: feihong - 2399.92 MHz http://valid.x86-secret.com/show_oc.php?id=89064

Yonah:
T2700: Joe Camel - 3739.80 MHz http://img156.imageshack.us/my.php?i...31piice6gk.jpg
T2600: s7e9h3n - 3915.4 MHz http://www.xtremesystems.org/forums/...postcount=1117
T2500: ojdr2001 - 3328.94 MHz http://valid.x86-secret.com/show_oc.php?id=99993
T2400: Victorshen - 3301.04 MHz http://valid.x86-secret.com/show_oc.php?id=107453

Xeon:
Xeon 1.60 GHz: cybug - 3600.95 MHz http://valid.x86-secret.com/show_oc.php?id=18753

Presler/Smithfield

Presler:
965XE: AbsoluteZero-TR - 7209.21 MHz http://valid.x86-secret.com/show_oc?id=87580
955XE: Alex_Ta&Delex&Maxxx - 7104.00 MHz http://www.pctuner.net/img_wb/955es/18.85.jpg
950: boshuter - 5617.63Mhz http://valid.x86-secret.com/show_oc?id=106444
940: nutcase - 5781.74 MHz http://valid.x86-secret.com/show_oc.php?id=86511
930: boostedevo - 5931.77 MHz http://valid.x86-secret.com/show_oc.php?id=80074
920: bessie - 5407.27 MHz http://valid.x86-secret.com/show_oc?id=85103

Smithfield:
840EE: MikeGuava - 5754.62 MHz http://valid.x86-secret.com/show_oc.php?id=63771
830: {PMS}fishy - 5555.96 MHz http://valid.x86-secret.com/show_oc?id=45157
820: FUGGER - 4967.05 MHz http://valid.x86-secret.com/show_oc.php?id=26397
805: maxxx&Alex-Ta&freezilla pctuner - 6007.95 MHz http://valid.x86-secret.com/show_oc.php?id=85246

Pentium 4 (ALL)

Gallatin:
3.46 GHz EE : Tyrou - 4679.99 MHz http://valid.x86-secret.com/show_oc?id=24118
3.4 GHz EE : shidokanjohn - 4959.3 MHz http://www.xtremesystems.org/forums/...6&d=1122490584

Prescott:
3.73 EE : FUGGER - 6300.2 MHz http://valid.x86-secret.com/show_oc.php?id=27274
3.4 GHz : cpulloverclock - 5443.6MHz - http://resources.vr-zone.com/ocdb/da...l_or_amd=intel
3.2 GHz : pc-ville.com - 5469.55 MHz http://www.pc-ville.com/page-overclo...es/P4press.php
3.0E : TaPaKaH & BiZaZ - 5042.2MHz http://www.xtremesystems.org/forums/...8&d=1142673405
2.8A : duck - 5662.7 MHz http://tokyo.cool.ne.jp/yasukazusimo/2800max2.gif
2.4 GHz : Pctuner - 5304.9 MHz http://resources.vr-zone.com/ocdb/da...l_or_amd=intel

Northwood:
3.4 GHz : tomshardware.com - 5255.4 MHz http://www.tomshardware.com/2003/12/30/5_ghz_project/
3.2C : Tom Holck - 4853.6MHz - http://resources.vr-zone.com/ocdb/da...l_or_amd=intel
3.0C : crazyIV - 4803MHz - http://resources.vr-zone.com/ocdb/da...l_or_amd=intel
2.80 GHz : Nitrogenium - 4680.60 MHz http://valid.x86-secret.com/show_oc?id=79696
2.66 GHz : TaPaKaH - 4510.4MHz http://cp.people.overclockers.ru/cgi...me=4510MHz.wmv
2.60 GHz : COOLALER - 4305.5MHz - http://resources.vr-zone.com/ocdb/da...l_or_amd=intel
2.53 GHz : TaPaKaH - 3808 MHz http://cp.people.overclockers.ru/cgi...me=3808MHz.rar
2.4 GHz : NISCO - 4218 MHz http://resources.vr-zone.com/ocdb/da...l_or_amd=intel
2.2 GHz : Gaebo - 3222.9 MHz http://resources.vr-zone.com/ocdb/da...l_or_amd=intel
2.0 GHz : sco01 - 3722 MHz http://www.overclockers.ru/cpubase/?...tails&id=15031
1.8 GHz : TaPaKaH - 4072 MHz http://cp.people.overclockers.ru/cgi...me=4072MHz.wmv
1.6 GHz : crotale - 3297.53 MHz http://www.xtremesystems.org/forums/...ad.php?t=33870

6-Series:
670: duck - 7657.6 MHz http://www.xtremesystems.org/forums/...&postcount=161
661: CAL930 - 7027.76MHz http://www.xtremesystems.org/forums/...&postcount=295
660: The Stilt - 6578MHz http://www.akiba-pc.com/Corsair_5400...PI_1M_1975.jpg
651: epox4life - 6021.67 MHz http://valid.x86-secret.com/show_oc?id=87488
650: stoolman - 5714.37 MHz http://valid.x86-secret.com/show_oc.php?id=42071
641: CDKey - 6198.78 MHz http://valid.x86-secret.com/show_oc?id=86399
640: stoolman - 6006.95 MHz http://valid.x86-secret.com/show_oc.php?id=42681
631: DJ_Rudy - 6750.33 MHz http://valid.x86-secret.com/show_oc.php?id=89574
630: Tyrou - 6105.8 MHz - http://valid.x86-secret.com/show_oc?id=55059

5-Series:
570J: Futto-kun - 6495 MHz http://www.geocities.co.jp/SiliconVa.../5603/6495.jpg
561: sin0822 - 5315.9 MHz http://valid.x86-secret.com/show_oc?id=36065
560J: Fugger - 6315 MHz http://www.vr-zone.com/ocdb/intel_sc...ots/270i.pjpeg
560: meke - 6128.54 MHz http://valid.x86-secret.com/show_oc?id=53076
550: duke : 5532.94 MHz : http://valid.x86-secret.com/show_oc.php?id=110712
550J:
540: Unseen - 5440.80 MHz http://www.thelab.gr/attachment.php?s=&postid=175182
530: engusz - 4438.2MHz http://resources.vr-zone.com/ocdb/da...l_or_amd=intel
530J:
524: PcCI2iminal - 5507.73 MHz http://valid.x86-secret.com/show_oc?id=94912
520J: SuAsDu - 4806.19MHz - http://valid.x86-secret.com/show_oc.php?id=61681
521: overclockers.ru - 4205.6 MHz http://www.overclockers.ru/lab/20468.shtml
516: firlando - 4399.99 MHz http://valid.x86-secret.com/show_oc.php?id=78840
515: Team OC-Papat - 5281.67MHz - http://valid.x86-secret.com/show_oc.php?id=7549
511J: natedog420 - 4707 MHZ http://valid.x86-secret.com/show_oc?id=107318
506: st-susie - 5806.26MHz http://valid.x86-secret.com/show_oc.php?id=63654
505: Kunaak - 5441.1MHz - http://resources.vr-zone.com/ocdb/da...l_or_amd=intel

Celeron
Celeron 356: Boblemagnifique - 6666.95 MHz http://valid.x86-secret.com/show_oc.php?id=111941
Celeron 352: TOMI - 6202.70 MHz http://image.space.rakuten.co.jp/lg0...8941osnf37.png
Celeron 351: QSS - 4087.45 MHz http://valid.x86-secret.com/show_oc?id=107722
Celeron 350: Justin Brown - 3983.66 MHz http://valid.x86-secret.com/show_oc.php?id=77545
Celeron 346: kabauterman 5193 mhz - http://www.hardwarextreme.de/dave/P5...n/P7290958.JPG
Celeron 345: NewBeetle - 5955 MHz http://homepage2.nifty.com/NewBeetle/img040.gif
Celeron 341: epox4life - 4739.88 MHz http://valid.x86-secret.com/show_oc.php?id=87523
Celeron 340: Hellrazor_FFXI - 4199.95 MHz http://valid.x86-secret.com/show_oc.php?id=33225
Celeron 336: PoLteRgeIsTiUm - 5049.60 MHz http://membres.lycos.fr/hebergementf...s/cpu-5049.bmp
Celeron 335: Boblemagnifique - 5131.8 MHz http://www.membres.lycos.fr/boblemag...5d/5131MHz.jpg
Celeron 331: Gollum - 4899.84 MHz http://valid.x86-secret.com/show_oc?id=109772
Celeron 330: Harleybro - 5409.17 MHz http://valid.x86-secret.com/show_oc.php?id=44980
Celeron 326: Gautam - 5259.31 MHz http://valid.x86-secret.com/show_oc.php?id=108985
Celeron 325: ryba - 5509.00 MHz http://www.rybamcz.boo.pl/ln2/5509.png
Celeron 320: PeGGaaSuSS - 4986.15 MHz http://valid.x86-secret.com/show_oc.php?id=26687
Celeron 315: blind_ripper - 5017.05 MHz http://valid.x86-secret.com/show_oc?id=106208
Celeron 310: kemod - 4858.57 MHz - http://valid.x86-secret.com/show_oc?id=95992
Celeron-M 420: Dumo - 3601.31 MHz http://valid.x86-secret.com/show_oc.php?id=90826
Celeron-M 360: Johnny Bravo - 3400.97 MHz http://valid.x86-secret.com/show_oc?id=92177
Celeron-M 1600: theinloi - 2803.71 MHz http://valid.x86-secret.com/show_oc?id=80887
Celeron-M 1300: Micutzu - 2921,32 http://valid.x86-secret.com/show_oc?id=83194
Celeron Mobile 1800: Jaan - 4226.73 MHz http://www.xtremesystems.org/forums/...7&postcount=34
Celeron Mobile 1500: Kenshin - 4072 MHz http://valid.x86-secret.com/show_oc.php?id=59955
Celeron Mobile 1400: crotale - 4242.9 MHz http://valid.x86-secret.com/show_oc.php?id=59150
Celeron 2.2 GHz: dokar - 3010.59 MHz http://valid.x86-secret.com/show_oc?id=108338
Celeron 850: Konflikt - 1232.6 Mhz http://img162.imageshack.us/my.php?image=145fsbdj8.jpg

AMD

FX
FX-62: OPPAINTER - 3635.9 MHz http://www.xtremesystems.org/forums/...d.php?t=100443
FX-60: gloatlizard - 3875.44 MHz http://valid.x86-secret.com/show_oc.php?id=97927
FX-57: before - 4208.1 MHz http://img199.imageshack.us/img199/9243/cpu42089kx.jpg
FX-55 (ClawHammer): |RickY|&Pedro Rocha - 4005.23 MHz http://valid.x86-secret.com/show_oc.php?id=10680
FX-55 (San Diego): -De$troyeR- - 4056.86 MHz http://valid.x86-secret.com/show_oc?id=108727
FX-53: |RickY| & Pedro Rocha - 3602.8 MHz http://resources.vr-zone.com/ocdb/da...tel_or_amd=amd

Dual Core (X2)

Manchester:

X2 4600+: Onepagebook - 3687.15 MHz http://valid.x86-secret.com/show_oc.php?id=78999
X2 4200+: sson74 - 3613.06 MHz http://valid.x86-secret.com/show_oc.php?id=83165
X2 3800+: OC-Team.BE - 3700.86 MHz http://valid.x86-secret.com/show_oc.php?id=102531

Toledo:
X2 4800+: BB Mods's - 3607.99 MHz http://valid.x86-secret.com/show_oc?id=89669
X2 4400+: Fosco - 3408.27 MHz http://valid.x86-secret.com/show_oc.php?id=62072
X2 3800+: isulk - 3350.3MH http://valid.x86-secret.com/show_oc.php?id=106101

Windsor:
X2 4600+: JuanFlatier - 3000.1 MHz http://www.xtremesystems.org/forums/...d.php?t=100742
X2 4200+: Cole Riemer - 2915.17 MHz http://valid.x86-secret.com/show_oc?id=107317
X2 4000+: DrJay - 3137Mhz http://valid.x86-secret.com/show_oc.php?id=112440
X2 3800+: anaboliss - 3102,92MHz http://valid.x86-secret.com/show_oc?id=106039
X2 3000+: Amiteriver - 3022.6 MHz http://www.xtremesystems.org/forums/...1&d=1154399289

Single Core Athlon64

Clawhammer:
4000+: gubben - 3614.77 MHz http://valid.x86-secret.com/show_oc?id=25221
3700+: twillius_basic - 3331.38 MHz http://valid.x86-secret.com/show_oc.php?id=16530
3500+: ojdr2001 & Silence - 3521.6 MHz http://valid.x86-secret.com/show_oc.php?id=49904
3400+: eshbach & Evil Spork - 3320.71 MHz http://valid.x86-secret.com/show_oc?id=12416
3200+: dsl & Spd - 2854.15 MHz http://valid.x86-secret.com/show_oc.php?id=100425
3000+: fr@me - 3156 MHz http://valid.x86-secret.com/show_oc?id=65931
2800+: setyotomo & ilyas - 3204.14 MHz http://valid.x86-secret.com/show_oc.php?id=18206

Manchester:
3500+: Willis - 3205.02 MHz http://valid.x86-secret.com/show_oc?id=79721
3200+: hey & tosunermc - 3405.83 MHz http://valid.x86-secret.com/show_oc?id=103390

Newcastle:
3800+: Shamino - 3201MHz http://www.vr-zone.com/ocdb/data.php...tel_or_amd=amd
3500+: |RickY| - 3604.0 MHz http://www.teampuss.com/forums/files/3500caa2c_234.jpg
3400+: Jrocket - 3359.59 MHz http://valid.x86-secret.com/show_oc?id=18225
3200+: .::Maddog::. & mosin_nagant - 3024MHz http://valid.x86-secret.com/show_oc.php?id=22563
3000+: Ssilencer - 3276.60 MHz http://img391.imageshack.us/img391/4638/32765gm.gif

Newark:
4000+: metalman2785 - 3394.26 MHz http://valid.x86-secret.com/show_oc?id=100828

Oakville:
3000+: firefly - 2700.13MHz - http://valid.x86-secret.com/show_oc.php?id=65488

Orleans:
3500+: Kiner - 3150.11 MHz http://valid.x86-secret.com/show_oc.php?id=93986
3000+: andre X-X - 3215.07 MHz http://valid.x86-secret.com/show_oc?id=110890

San Diego:
4000+: El Snorro - 3750.83 MHz http://valid.x86-secret.com/show_oc?id=76885
3700+: Misteroadster - 3704.71 MHz http://valid.x86-secret.com/show_oc?id=38280
3500+:

Venice:
3800+: PC Ice - 3878.05 MHz http://valid.x86-secret.com/show_oc.php?id=10699
3500+: cpulloverclock - 3571.42 MHz http://valid.x86-secret.com/show_oc?id=46575
3400+: damarble - 2850.66 MHz http://valid.x86-secret.com/show_oc.php?id=67088
3200+: s7e9h3n - 3723.6MHz - http://www.xtremesystems.org/forums/...8&postcount=12
3000+: cpulloverclock - 3644.18 MHz http://valid.x86-secret.com/show_oc?id=41857
3000+ (754): [ZIZI]@XS - 3207.22 MHz http://valid.x86-secret.com/show_oc?id=83602

Winchester:
3000+: easypanic - 3412.61 MHz http://valid.x86-secret.com/show_oc?id=15933
3200+: NewBeetle - 3463 MHz http://cal930.sakura.ne.jp/cgi-bin/c...le/3463MHz.gif
3500+: Boogotop - 3271,70 MHz http://www.vr-zone.com/ocdb/data.php...tel_or_amd=amd

Opteron

Toledo:
Opteron 180: cupra - 3450.99 MHz http://valid.x86-secret.com/show_oc?id=76888
Opteron 175: ixtapalapaquetl - 3420.73 MHz http://valid.x86-secret.com/show_oc?id=80573
Opteron 170: Absolute_0 - 3473.7 Mhz http://valid.x86-secret.com/show_oc?id=74927
Opteron 165: Brian Mychajluk (TheLawnRanger) - 3460 MHz http://valid.x86-secret.com/show_oc?id=112439

Venus:
Opteron 154: s7e9h3n - 4005.19MHz - http://valid.x86-secret.com/show_oc?id=70094
Opteron 150: dumo - 3769 MHz http://img226.imageshack.us/img226/8...shot0930im.jpg
Opteron 148: SPLMANN Overclocking Team Switzerland - 3788.19 Mhz http://valid.x86-secret.com/show_oc?id=97911
Opteron 146: MOSO - 3813 Mhz - http://valid.x86-secret.com/show_oc.php?id=70263
Opteron 144: Overcrash - 3657.8 MHz http://valid.x86-secret.com/show_oc?id=75334

Turion

ML series:
Turion ML-42: hey & tosunermc - 2833.5 MHz http://valid.x86-secret.com/show_oc.php?id=103141
Turion ML-37: Trouffman - 2288.56 MHz http://valid.x86-secret.com/show_oc.php?id=74997
Turion ML-32: victorsea - 2844.9 4MHz http://valid.x86-secret.com/show_oc.php?id=62558
Turion ML-30: Richard Cheung - 2840.1 MHz http://valid.x86-secret.com/show_oc.php?id=28080

MT series:
Turion MT-40: ryan.crest - 2935.4 MHz http://www.xtremesystems.org/forums/...1&d=1141651189
Turion MT-32: marcoland - 2745.4 MHz http://img466.imageshack.us/my.php?image=305mhz9cj.jpg
Turion MT-30: Badong - 3200 MHz http://valid.x86-secret.com/show_oc.php?id=82405

Sempron

Sempron64 3400+ (Manila): Ozzimark - 3119.6mhz http://valid.x86-secret.com/show_oc?id=97360
Sempron64 3400+ (Palermo): fr@me - 2928.25 MHz http://valid.x86-secret.com/show_oc?id=66864
Sempron64 3300+ (Palermo): AndreyKV & Nickolas - 3070 MHz http://valid.x86-secret.com/show_oc?id=84032
Sempron64 3200+: AeGis - 3065.32 MHz http://valid.x86-secret.com/show_oc.php?id=78404
Sempron64 3100+ (Palermo): dsl & Spd - 3195.79 MHz http://valid.x86-secret.com/show_oc.php?id=100426
Sempron64 3000+ (Manilla): QSS - 2669.33 MHz http://valid.x86-secret.com/show_oc?id=106505
Sempron64 3000+ (Palermo) S939: pr1nce - 3208.18 MHz http://valid.x86-secret.com/show_oc?id=75376
Sempron64 3000+ (Winchester): TiN_EOF - 3031.20 Mhz http://www.topmods.net/tin/3031.png
Sempron64 3000+ (Palermo): dsl & Spd - 3316.08 MHz http://valid.x86-secret.com/show_oc.php?id=110827
Sempron64 2800+ (Manilla): QSS - 2747.59 MHz http://valid.x86-secret.com/show_oc?id=107555
Sempron64 2800+ (Palermo): fr@me & Xupyp1 - 3311.93 MHz http://valid.x86-secret.com/show_oc?id=93955
Sempron64 2600+ (Palermo): pawell262 - 3220.99 MHz http://valid.x86-secret.com/show_oc.php?id=67685
Sempron64 2500+ (Palermo): JunQiang - 3003.86 MHz http://valid.x86-secret.com/show_oc.php?id=75385
Sempron 3100+ (Paris): fr@me & Xupyp1 - 2731.31 MHz http://valid.x86-secret.com/show_oc?id=85371
Sempron 2800+ (Palermo): turez - 2498.25 MHz http://valid.x86-secret.com/show_oc.php?id=38643
Sempron Mobile 3000+ : hs - 2972.41 Mhz http://valid.x86-secret.com/show_oc?id=69610

Duron/Barton/Athlon/XP
2800+ (Barton): ruggero - 2900.0 MHz http://img216.exs.cx/img216/2183/immagine29002vy.jpg
2600+ (Barton): pietro - 3466.3MHz - http://resources.vr-zone.com/ocdb/da...tel_or_amd=amd
2500+ (Barton): NewBeetle - 3578.4MHz - http://resources.vr-zone.com/ocdb/da...tel_or_amd=amd
1800+ (Toro): boblemagnifique - 3234.8 MHz http://www.membres.lycos.fr/boblemag...00/3235MHz.png
1700+ (Toro): Misteroadster - 3227 MHz http://valid.x86-secret.com/show_oc?id=44359
1600 (T-Bird): ruggero - 2853.72 MHz http://valid.x86-secret.com/show_oc?id=80265
1.8 GHz (Applebred): fr@me&Xupyp1 - 2881 Mhz http://valid.x86-secret.com/show_oc?id=73482
1.4 GHz (Applebred): cpulloverclock - 3031.14MHz http://valid.x86-secret.com/show_oc.php?id=40070
900 (T-Bird): ruggero - 1682.97 MHz http://valid.x86-secret.com/show_oc?id=26641
750 (Spitfire): gianni-gt OC Team Switzerland - 1060.65 MHz http://valid.x86-secret.com/show_oc?id=101217

Rafiq_kassam1
09-29-2006, 08:26 PM
umm

youre world records are slightly off..

http://xtremesystems.org/forums/showthread.php?t=59753
I don't know if you are reffering to this thread, but.....
this thread is for "STEAM MEMBER OVERCLOCKS ONLY

TokyoLife
09-29-2006, 09:12 PM
I don't know if you are reffering to this thread, but.....
this thread is for "STEAM MEMBER OVERCLOCKS ONLY

Yea serious?????:confused:

micromartyaka
09-30-2006, 08:17 AM
http://valid.x86-secret.com/show_oc?id=125940
AMD 64 Single Core @ 2.74

Rafiq_kassam1
09-30-2006, 08:46 AM
http://valid.x86-secret.com/show_oc?id=125940
AMD 64 Single Core @ 2.74

You took me out of the top 5....damn you!!! :(

lol

xelink
09-30-2006, 09:32 AM
I don't know if you are reffering to this thread, but.....
this thread is for "STEAM MEMBER OVERCLOCKS ONLY

tehn why is there a section which says highest oC, and then one that says Steam OC???

Dala-Jay*
09-30-2006, 09:51 AM
It says top-5 of the steam members overclocks, no where does it say where challenging the WR's :eek:

Hwkiller
09-30-2006, 10:00 AM
Wait, I have a 2.6ghz 3500+, and I'm not added? I posted my cpuz thing earlier.

On second thought... I didn't read the thing correctly, lmao.. I didn't read the front page like it shoulda been.

Rafiq_kassam1
09-30-2006, 10:05 AM
Wait, I have a 2.6ghz 3500+, and I'm not added? I posted my cpuz thing earlier.

On second thought... I didn't read the thing correctly, lmao.. I didn't read the front page like it shoulda been.

Can you post it again for me.

Thanks.

Hwkiller
09-30-2006, 10:07 AM
http://valid.x86-secret.com/show_oc?id=125962

I can get it to 2.7, but I prefer 2.6 (I like even numbers).

If my mobo could friken change the vcore, it'd go way higher I'm sure.

Dala-Jay*
09-30-2006, 12:04 PM
http://valid.x86-secret.com/show_oc?id=123428
2.0ghz stock, 0.69ghz OC (Total 2.69ghz, Was hopping around 2.7), Was the F11 bios for my mobo that helped the most. Aircooled, No significant temp rise (oddly). Gratz to DalateJC for his future submission of a 4.00ghz OC on air (E6600).

Don't forget Muzo! :)

xero273
09-30-2006, 12:14 PM
m3talhead's Opteron 145 is a single core CPU.

micromartyaka
09-30-2006, 06:36 PM
I have gotten to 2.9, but I had to underclock the ram.

xelink
09-30-2006, 08:19 PM
http://img226.imageshack.us/img226/8849/clocktj2.th.png (http://img226.imageshack.us/my.php?image=clocktj2.png)
(not a serious run, had stuff in background, just wanted to show stability)

c2d e6400 allendale @3.07GHz
2GB RAM @ DDR2-766 5-4-3-X timings
DFI Infinity 975X/G

only thing keeping me from going higher is the fact that the board only has a 1066 strap so the MC gets kinda stressed past 350FSB. runs 383FSB all day long without breaking a sweat with an FSB wall at around 395ish FSB(primes nice and stable 24/7 at 395 stock voltage on everything)

http://valid.x86-secret.com/show_oc?id=126079

again stock volts(1.32V lowest board allows) on everything idles 29-33C(core temp and ITE smart guardian give more or less same temps) depending on ambient temp and load under prime/orthos small FFTs is 43C-48C using Scythe Infinity. 1.9V on RAM(lowest baord allows) at 766mhz 5-4-3-X

board is DFI Infinity 975X/G great performer has crossfire, just needs a better BIOS, currently using 8/30 BIOS

Rafiq_kassam1
09-30-2006, 08:23 PM
http://img226.imageshack.us/img226/8849/clocktj2.th.png (http://img226.imageshack.us/my.php?image=clocktj2.png)

c2d e6400 allendale @3.07GHz
2GB RAM @ DDR2-766 5-4-3-X timings
DFI infinity 975X/G

only thing keeping me from going higher is the fact that the board only has a 1066 strap so the MC gets kinda stressed past 350FSB. runs 383FSB all day long without breaking a sweat wih an FSb wall at around 395ish FSB(primes nice and stable 24/7 at 395 stock voltage on everything)


Follow this please and re-post it again.

BTW: Nice overclock. Finally someone here has a e6400.

[How To Get Your CPU-Z Validated?

Open CPU-Z and click on "About" Click Me (http://img62.imageshack.us/my.php?image=1su7.jpg)

Click on "Validation" and then click on "Save Validation File" Click Me (http://img95.imageshack.us/my.php?image=2qb9.jpg)

Save the file anywhere on your harddrive Click Me (http://img62.imageshack.us/my.php?image=3xi9.jpg)

Go to http://valid.x86-secret.com

Fiill out the information that is requested.

Click "Browse" and search where you saved your file from CPU-Z and then click OK

Click "VALIDATE!" (Aren't you just as happy as I am...like OMG!)

Copy and Paste your link here in this thread.

xelink
09-30-2006, 08:44 PM
I have gotten to 2.9, but I had to underclock the ram.

just tighten the timings correspondingly, k8 likes low latency moreso than high bandwidth.


Follow this please and re-post it again.

BTW: Nice overclock. Finally someone here has a e6400.


I edited in a CPUz Validation link, check back

http://img226.imageshack.us/img226/8849/clocktj2.th.png (http://img226.imageshack.us/my.php?image=clocktj2.png)
(not a serious run, had stuff in background, just wanted to show stability)

c2d e6400 allendale @3.07GHz
2GB RAM @ DDR2-766 5-4-3-X timings
DFI Infinity 975X/G

only thing keeping me from going higher is the fact that the board only has a 1066 strap so the MC gets kinda stressed past 350FSB. runs 383FSB all day long without breaking a sweat with an FSB wall at around 395ish FSB(primes nice and stable 24/7 at 395 stock voltage on everything)

http://valid.x86-secret.com/show_oc?id=126079

again stock volts(1.32V lowest board allows) on everything idles 29-33C(core temp and ITE smart guardian give more or less same temps) depending on ambient temp and load under prime/orthos small FFTs is 43C-48C using Scythe Infinity. 1.9V on RAM(lowest baord allows) at 766mhz 5-4-3-X

board is DFI Infinity 975X/G great performer has crossfire, just needs a better BIOS, currently using 8/30 BIOS

not even THAT great an OC(by overclockers standards)... looking back, I should have gotten either a DS3 or a MSI PN975X both cost around the same amount... again save for the board, nothing in the sytem is being pushed, still have about .1V to add to the CPU before I would start backing off...

also, rafiq, having mroe l2 cache inhibits overclocks because of a higher transistor count and batch yield issues, remember, all that cache has to pass an inspection and the yields aren' quite as god on chips with more l2 cache. See how i got an allendale vs. a conroe? good 100$ less, it's higher binned(highest binned allendale>lowest binned conroe OC wise) and i can ratchet up the FSB higher for a given clock. an e6400 at 366FSB typically outperforms an x6800 at 266fsb(though as you see i have issues getting as high an FSB as I'd have prefered, was aiming for 400 or 416.6FSB[harmonic frequencies which helps stabiltiy and performance to a point])

micromartyaka
10-01-2006, 08:26 AM
If I lower my HT frequency(from 3x to 5x) will I get a performance loss. At this setting I can overclock my AMD 3800+ a lot further and it runs way cooler.

Rafiq_kassam1
10-01-2006, 08:28 AM
If I lower my HT frequency(from 3x to 5x) will I get a performance loss. At this setting I can overclock my AMD 3800+ a lot further and it runs way cooler.

There won't be any difference you will notice. So yea got to 3x.

micromartyaka
10-01-2006, 08:50 AM
Is 1.5 too high of a voltage for my cpu. A AMD 3800+ Orleans(AMD2).

Hwkiller
10-01-2006, 09:22 AM
There won't be any difference you will notice. So yea got to 3x.

How do you lower it?

Or is it yet another thing my mobo won't allow?

micromartyaka
10-01-2006, 09:29 AM
Bios settings.

Hwkiller
10-01-2006, 09:30 AM
Bios settings.

Is it literally just called "HT" in the bios?

If so, I don't think mine has it to change :(

Dammit!
Can't change vcore, multiplier, OR the HT.

micromartyaka
10-01-2006, 10:20 AM
That sucks. You have a prebuilt PC?

Hwkiller
10-01-2006, 10:41 AM
That sucks. You have a prebuilt PC?

No... built myself.

The mobo is an msi k9n 550 neo-f.

MuzoEdge
10-01-2006, 04:52 PM
On the OC charts, is it the most OC'ed (i.e. 0.7ghz) or total speed?

Goldy1986
10-01-2006, 05:30 PM
AMD 64 3200+ (venice) stock = 2GHz
http://valid.x86-secret.com/show_oc?id=126375

xelink
10-01-2006, 08:07 PM
Is 1.5 too high of a voltage for my cpu. A AMD 3800+ Orleans(AMD2).

depends on hwo long you want the system to run. 1.5V is certainely high though I wouldn't do it for the long term. I was paranoid of going over stock on my opteron system myself, just see how far stock volts get you(1.35V) newer steppings are reaching close to 3GHz on stock, and there seems to be a manufacturing wall at 3.0-3.1GHz so until AMD implements a transistor shrink you won't eb going much higher...


also, check your list, it isn't an opteron 64 x2, it is an opteron. it isn't even dual core, jsut single core(lowest dual core model is 165)

ÁR╝
10-04-2006, 09:27 PM
ummm...no FX section or should i just be under the X2's?

http://valid.x86-secret.com/show_oc.php?id=122322

got it at 3ghz i'll go higher later.

TokyoLife
10-04-2006, 09:36 PM
ummm...no FX section or should i just be under the X2's?

http://valid.x86-secret.com/show_oc.php?id=122322

got it at 3ghz i'll go higher later.

How is your cpu performance? Wanted to get one but bought the x24400 instead due to money issues

ÁR╝
10-04-2006, 09:50 PM
How is your cpu performance? Wanted to get one but bought the x24400 instead due to money issues

not bad! my HTT is still at X5 and ram timings are 2.5-3-3-5

i should get some better cooling though...still stock.

temps are 50idel and 56 max...

i see that 2 fans don't help..

wtf? 44C! that's by dual fan cooling! wow, my gpu is hotter than CPU

TokyoLife
10-04-2006, 09:57 PM
not bad! my HTT is still at X5 and ram timings are 2.5-3-3-5

i should get some better cooling though...still stock.

temps are 50idel and 56 max...

i see that 2 fans don't help..

wtf? 44C! that's by dual fan cooling! wow, my gpu is hotter than CPU

nice yea get a zal or a big typhoon and certainly your cpu will idle/load around 30-40ish. So you have another fan blowing into your video card?

ÁR╝
10-04-2006, 10:00 PM
nice yea get a zal or a big typhoon and certainly your cpu will idle/load around 30-40ish. So you have another fan blowing into your video card?

inernet slow.

FX has unlocked muilti so i have like 12x 240sometimes...

Rafiq_kassam1
10-07-2006, 04:50 PM
Looks like now CPU-Z supports Intel Quad core:

New HTML report.
Intel Core 2 Quad, Celeron 360, Mobile Core 2 Duo T5200 support.
Added VIA VT8237A southbridge.

Goldy1986
10-07-2006, 05:04 PM
hey Rafiq, shouldnt i be in the top 5 for amd 64 single core? :( or am i mistaken

Rafiq_kassam1
10-07-2006, 05:13 PM
hey Rafiq, shouldnt i be in the top 5 for amd 64 single core? :( or am i mistaken

No your are not, but I have put you in the list of all the amd 64 single cpu's.

Goldy1986
10-07-2006, 05:39 PM
No your are not, but I have put you in the list of all the amd 64 single cpu's.


how are you working out the rankings there? because I have a 25% increase when i can see 12 % increases on your list?

Rafiq_kassam1
10-10-2006, 07:25 PM
Well I know what you mean, I guess I should of though more before I started with listing the overclocks in this thread.

But it's going to be more of a hassle to change it now if you know what I mean.

Beer_N_Cookies
10-10-2006, 08:14 PM
how are you working out the rankings there? because I have a 25% increase when i can see 12 % increases on your list?

You do know that its harder to overclock a 3800 venice compared to a 3200 venice on air right? I acheieved a 2.5 Ghz overclock with my 3200 until my friend broke it and bought me a 3800. I'm pretty sure you can overclock the 3200 a bit higher on air or change the CPU fan and heatsink for a Zalman or something. But the higher you go with venice processors on air the harder it is. Well, its my opinion owning both venice processors. And I'm pretty sure you can adjust the voltage a bit more and get some juice out of it.

Goldy1986
10-10-2006, 10:38 PM
You do know that its harder to overclock a 3800 venice compared to a 3200 venice on air right? I acheieved a 2.5 Ghz overclock with my 3200 until my friend broke it and bought me a 3800. I'm pretty sure you can overclock the 3200 a bit higher on air or change the CPU fan and heatsink for a Zalman or something. But the higher you go with venice processors on air the harder it is. Well, its my opinion owning both venice processors. And I'm pretty sure you can adjust the voltage a bit more and get some juice out of it.


well, you can't really complain about your computer ever IMO, it all works out the same, and that is, you get out of it what you put in it, you choose the hardware, you use the hardware

kingcars66
10-11-2006, 03:08 PM
Here's my E6400 @ 3.2GHz

http://valid.x86-secret.com/show_oc?id=129199

rantarave
10-11-2006, 03:45 PM
its crappy but its still an OC very stable!!

http://valid.x86-secret.com/show_oc?id=129262

raised FSB to 200 and i have a 11x multi and BAM!! my 2500+ turned into a 3200+ YAY!!

xelink
10-12-2006, 02:01 AM
shouldn't you have a diferent section for allendale vs. conroe?

Rafiq_kassam1
10-12-2006, 05:06 AM
Why though?

Rafiq_kassam1
10-14-2006, 01:46 PM
Here's my E6400 @ 3.2GHz

http://valid.x86-secret.com/show_oc?id=129199


Okay I put it on the list.

kingcars66
10-14-2006, 01:54 PM
Okay I put it on the list.


Sweet :D . Although it was 2.13GHz stock, not 2.3 ;) .

Maybe someday I'll stop being lazy and push my E6400 to the limit. That day isnt today :D .

ÁR╝
10-14-2006, 03:24 PM
i'm going to cry....i'm not on...

http://valid.x86-secret.com/show_oc.php?id=122322

virusfarm
10-14-2006, 03:41 PM
http://valid.x86-secret.com/show_oc?id=130065
not bad for something i bought for $250 9 months ago on ebay.
on top of the CPU is a zalman air cooler :cool:

SerialKilla
10-14-2006, 08:44 PM
http://valid.x86-secret.com/show_oc?id=130113

Also running 512MB Corsair XMS PC3200 (DDR400) @ 230MHz (DDR470!)... need to upgrade to more RAM soon!

Rafiq_kassam1
10-14-2006, 08:58 PM
Okay I will add you 3

jmmtn4aj
10-14-2006, 09:00 PM
Why the hell is James running PC4000 500mhz ram at 416mhz?

xelink
10-18-2006, 01:15 AM
Why though?

they're classified as diferent architectures. technically the s939 opterons are the same architecture as the s939 athlons yet you place them seperately, the same should go for c2d. Either that or group the cellerons and semprons accordingly since they have half their l2 cache disabled like allendale...

Why the hell is James running PC4000 500mhz ram at 416mhz?
probably because through benchmarking he found that the reduced latency he got from running that slow outweighed any aditional bandwidth gains. I'd heard that 440mhz is about the optimal spot for decent performance DDR1 though it varies by IC, UTTC is diferent than BH5.


Also i have 3.066GHz, that number is rather intentional, it is on a harmoic FSB frequency which helps improve data integrity(there is a reason why intel launched 3.066GHz p4s, 20x multi at 533FSB is a harmic FSB and 383 which is what i have is an intermediate value which means XXXX if you're going for a benchmark record or want to brag, but is beneficial for day to day stability if you want to go the extra mile next step for me would be 400FSB)

EdwardTobia
10-18-2006, 05:10 AM
Heres my CPU-Z Verified

AMD Athlon 64 3000+ 2.0ghz (Newcastle Core, Socket 754) @ 2.45ghz

http://valid.x86-secret.com/show_oc?id=130958

PirateMyke
10-18-2006, 06:18 AM
My Pentium D 805 is Overclocked from the stock 2.66 to 3.8 GHz... I'll validate later thou!!!

Dala-Jay*
10-18-2006, 10:31 AM
Amazingly unfair! Got me E6600 to 4Ghz a minute ago, go to upload the validation, and i'm using an outdated version of CPU-Z :'(

Dala-Jay*
10-18-2006, 03:17 PM
http://valid.x86-secret.com/show_oc?id=131086

Shall we just make it 4Ghz for the record? ;)

ÁR╝
10-18-2006, 05:47 PM
http://valid.x86-secret.com/show_oc?id=131086

Shall we just make it 4Ghz for the record? ;)

nice...what cooling?

kingcars66
10-18-2006, 05:51 PM
http://valid.x86-secret.com/show_oc?id=131086

Shall we just make it 4Ghz for the record? ;)


What? I don't see at least 4000.00MHz on there :p .

Rafiq_kassam1
10-18-2006, 07:45 PM
http://valid.x86-secret.com/show_oc?id=131086

Shall we just make it 4Ghz for the record? ;)

XXXX yea nice!

I will add it right now.

That's godly.

xero273
10-18-2006, 08:13 PM
http://valid.x86-secret.com/show_oc?id=131086

Shall we just make it 4Ghz for the record? ;)

So the ram used was it this set?

http://www.newegg.com/Product/Product.asp?Item=N82E16820231098

Wonder if it is prime stable.

Rafiq_kassam1
10-20-2006, 06:15 PM
What cooling are you using to get it to 4 Ghz?

And what are your Load and Idle temps?

Dala-Jay*
10-20-2006, 08:32 PM
That was on a Zalman 9500, Idle temps were about 67c :o

My RAM's like that but light blue :(

And it's about as stable as an alchoholic mother of 9 ;) Had to boot at 3.85, then Setfsb the last 15, will need a Vdroop/Vcore mod, and watercooling to go further :(

cs-hl_addictz
10-21-2006, 09:43 AM
dam 67 is a bit high...think about watercooling.

ÁR╝
10-23-2006, 04:39 PM
http://valid.x86-secret.com/show_oc?id=132357

at 3ghz...
Oh ya...FX don't count on that list do they....:(

dracolnyte
10-23-2006, 04:56 PM
http://valid.x86-secret.com/show_oc?id=132359 muahaha

Dala-Jay*
10-23-2006, 05:08 PM
dam 67 is a bit high...think about watercooling.

Gonna get a kit when 've got the money :)

Also thinking about Vdroop and Vcore mods for the board

SlyKilLeR
10-23-2006, 05:25 PM
AMD 3500+ 2.2 GHz Stock
http://valid.x86-secret.com/show_oc?id=132366

we should create a video card one. I think I might win.

Dala-Jay*
10-23-2006, 05:26 PM
Nearly killed my x1600Pro going from 500 to 600 ><

SlyKilLeR
10-23-2006, 05:30 PM
Nearly killed my x1600Pro going from 500 to 600 ><

haha.

Rafiq_kassam1 you up for creating a video card one?

ÁR╝
10-23-2006, 05:30 PM
AMD 3500+ 2.2 GHz Stock
http://valid.x86-secret.com/show_oc?id=132366

we should create a video card one. I think I might win.

?really?

My 7900GT
http://www.freewebtown.com/jjpjimmy123/library/Majormemclock.JPG

SlyKilLeR
10-23-2006, 05:31 PM
?really?

My 7900GT
http://www.freewebtown.com/jjpjimmy123/library/Majormemclock.JPG

Ya i beat you. 7900gt voltmodded 700/1800.

http://img297.imageshack.us/img297/9384/7900gtvf9.jpg

ÁR╝
10-23-2006, 05:36 PM
Ya i beat you. 7900gt voltmodded 700/1800.

DARN! I so need to get a 3rd party cooler...mines still stock...I got to 1800mhz, but that's a while ago, and now it can't do it..

SlyKilLeR
10-23-2006, 05:43 PM
DARN! I so need to get a 3rd party cooler...mines still stock...I got to 1800mhz, but that's a while ago, and now it can't do it..

haha.
http://img297.imageshack.us/img297/9384/7900gtvf9.jpg

I have a ZALMAN VF900 with 9 OCZ BGA heatsinks. One for every memory and one on the back of the card on the IC's.

7900GT Mods *Final*
http://forums.steampowered.com/forums/showthread.php?t=434958&highlight=slykiller

Shows everything I did. I actually have the card at 700core now, not 680, but its a cool thread with benchmarks. Here is a pic:

http://i76.photobucket.com/albums/j13/SlyKilLeR/7900gt.jpg

SlyKilLeR
10-24-2006, 04:26 PM
Rafiq_kassam1 will you make a video card OC thread?

ÁR╝
10-24-2006, 04:36 PM
Rafiq_kassam1 do you hate me....

Rafiq_kassam1
10-24-2006, 05:09 PM
Rafiq_kassam1 do you hate me....

No. Why would you say that? Did I do something wrong?

edit: Oh the fx...okay my bad, I forgot. It will be on the list.

Rafiq_kassam1 will you make a video card OC thread?

That does seem like a good idea. I will think about it.

Thanks.

SlyKilLeR
10-24-2006, 05:13 PM
^^Haha cool. It would be awesome if you did.

xelink
10-30-2006, 09:09 PM
still holding the philosophy that if an opteron can get its own seperate category so should allendale. Allendale has less in commen than conroe than toledo does with orleans as compared to otehr athlon 64/opteron revisions which you seperate

Rafiq_kassam1
11-01-2006, 07:16 PM
I was starting to seperate the CPU's with the type of core it is, then I though I should ask you guys if that makes sence.

So should I do so or no?

dracolnyte
11-01-2006, 07:21 PM
hmm... i think that its better for you to sort out the rankings by % overclocked because it is unfair that say, i have a 3000+ 1.8GHz @ 2.7GHz and i am still underneath a stock clock FX-62. oh and by the way, could you use my user name when posting up my cpuz? thanks

micromartyaka
11-01-2006, 07:48 PM
Can you separate out the AMD single cores too.

Rafiq_kassam1
11-01-2006, 08:05 PM
Yep I am trying that

Dala-Jay*
11-01-2006, 08:10 PM
Yeah that would be better, or the actuallt OC'd amount (400-500mhz ect)

Rafiq_kassam1
11-07-2006, 08:01 PM
hummm all the headingd seem clustered don't you think?

Tw33ter
11-07-2006, 08:05 PM
Like is it now, is perfect :cool:, maybe seperate the intel's like you did the amd's.

Rafiq_kassam1
11-07-2006, 08:09 PM
maybe seperate the intel's like you did the amd's.

Where do you see that?

Tw33ter
11-08-2006, 05:43 AM
Under the p4's, BTK has a northwood, and those other 2 people have prescotts.

Shukie06051988
11-08-2006, 04:52 PM
how do c2d fsbs work? i think it is 266 but howcome their rams r like pc6400?

rotNdude
11-08-2006, 05:06 PM
Keep up the good work, Rafiq! I added this to this super sticky:

http://forums.steampowered.com/forums/showthread.php?t=430906

Rafiq_kassam1
11-09-2006, 05:15 AM
Thanks rotNdude. It still does need a lot of work though, just that I don't have a lot of time to come on the forums lately.

ChikenBiscits
11-11-2006, 01:22 PM
http://valid.x86-secret.com/show_oc?id=137434

Intel Core2 Duo E6600 @ 3.0

Hwkiller
11-11-2006, 01:26 PM
http://valid.x86-secret.com/show_oc?id=137434

Intel Core2 Duo E6600 @ 3.0

Is there a way to oc your ram? Because I bet you could.

I'm not sure how to do it really, my mobo did it for me, somewhat thx to am2.

It has a cpu/6 ratio, so if my cpu is 2.618 ghz, my ram is 436.

xero273
11-11-2006, 01:30 PM
Is there a way to oc your ram? Because I bet you could.

I'm not sure how to do it really, my mobo did it for me, somewhat thx to am2.

It has a cpu/6 ratio, so if my cpu is 2.618 ghz, my ram is 436.

There is no independent memory overclocking if that is what you are referring to. The only motherboard that I know has independent memory OCing features is DFI's RD600.

Rafiq_kassam1
11-11-2006, 01:33 PM
http://valid.x86-secret.com/show_oc?id=137434

Intel Core2 Duo E6600 @ 3.0

Okay, you have been added.

ChikenBiscits
11-11-2006, 01:36 PM
Okay, you have been added.

Thanks, I cant believe that one guy got his to 3.8... Unbeleveable. Is my OC good though? I mean seems fine to me but other people are getting such better OC's than me with their E6600's you think I just got a bad chip?

Dala-Jay*
11-11-2006, 01:43 PM
What ram Have you got? I just got mine stable at 3.4 with a tiny Vcore boost (1.3625)

Also, any idea what week your chip is?

ChikenBiscits
11-11-2006, 01:53 PM
What ram Have you got? I just got mine stable at 3.4 with a tiny Vcore boost (1.3625)

Also, any idea what week your chip is?

RAM: http://www.newegg.com/product/product.asp?item=N82E16820145590

My week - 29

dustbunny
11-11-2006, 01:54 PM
Blah over clocking I hate it.

Stevo
11-11-2006, 02:27 PM
my E6600

http://valid.x86-secret.com/show_oc?id=137482

im fairly postive i can get that much higher, im just waiting on silent fans atm:)

my temps are about 30c Idle and 38-40c after playing a couple hours of high spec games.

have to do somthing with my RAM aswell..

Rafiq_kassam1
11-11-2006, 02:33 PM
Added Stevo.

Stevo
11-11-2006, 02:36 PM
Added Stevo.
:)

i accualy might try some more OCing tonight... i feel lucky

Rafiq_kassam1
11-11-2006, 02:37 PM
:)

i accualy might try some more OCing tonight... i feel lucky

If you do, post it here again and I will update it. No biggie. :D

infotech1
11-11-2006, 06:47 PM
http://valid.x86-secret.com/show_oc?id=99454
3000+ 64 939 @ 2658mhz

Rafiq_kassam1
11-11-2006, 07:41 PM
infotech1 you are added.

Anyways:

Finally It looks more nice and clean then before. What do you think better? Should I add anymore things (Info ect....)

xero273
11-11-2006, 08:27 PM
As soon as I get both my rigs setup, I'll post. Hopefully, the two CPUs I have are good steppings.

e6600 - L628A236 (too bad it's not a B)
4200+ - LCB9E 0636 BPMW

infotech1
11-11-2006, 08:54 PM
Is the top 5 over clockers, based on overall speed and not total over clock?
because that seems kind of biast towards people who have brought a 3500+ etc and only need to overclock less.

Other than that the new layout is very nice :)

ZeusH8sU
11-11-2006, 08:56 PM
AMd 3700 SD core.
http://valid.x86-secret.com/show_oc?id=137547

Stevo
11-12-2006, 03:44 AM
New E6600 Overclock

3.3ghz

http://valid.x86-secret.com/show_oc?id=137600

Stevo
11-12-2006, 03:57 AM
also guys, if you want to test how stable your new OC is, download Orthos

http://sp2004.fre3.com/beta/beta2.htm

let it run for about 9-10hours, if you get 0 errors then its a perfect OC. (only need this if your hitting the 3.3-3.6 mark..

Dala-Jay*
11-12-2006, 06:01 AM
Mines fine on stock voltage too 3.35Ghz, then after that it seems to need exponential increase in volatge to get further :(

Rafiq_kassam1
11-12-2006, 01:19 PM
also guys, if you want to test how stable your new OC is, download Orthos

http://sp2004.fre3.com/beta/beta2.htm

let it run for about 9-10hours, if you get 0 errors then its a perfect OC. (only need this if your hitting the 3.3-3.6 mark..

Is this a popular program?

rotNdude
11-12-2006, 01:21 PM
Most of the OC'ing sites are using it now.

cac
11-12-2006, 02:21 PM
wow at 390*9 1.45V core on my e6700 it lasted like 2 secs.

robinsonsam
11-12-2006, 02:35 PM
http://valid.x86-secret.com/show_oc?id=137767

hehehehehe

what a crap heap

though i mite aswell get the last bit of fun out of it

oh wait

temps dont exeed 47c

meh

Rafiq_kassam1
11-12-2006, 07:01 PM
You guys, I need to ask you a question. Do you think this Idea that SlyKilLeR said is a good one? Should I do it? I don't really mind, but will it be useful? That it what I am thinking. I really do not know if it will be that useful as this thread. But if you guys have any opinion if I should/should not do it please tell me. As I don't want to go ahead and do it and then find out it's a total waste. (Wastes my time you know....)

Thanks.

Edit: Or it does not have to necessarily be a Video card OC thread, but rather like a list of Steam members Video cards??? Dunno just thinking.

Rafiq_kassam1 will you make a video card OC thread?

-----------------

http://valid.x86-secret.com/show_oc?id=137767



Lol nice overclock. D:

Duo Maxwell
11-13-2006, 01:28 AM
Pentium D 930
Standard 3.0Ghz...overclocked to 4.01GHz
http://valid.x86-secret.com/show_oc?id=137872

Yay, record for me.

robinsonsam
11-13-2006, 02:39 AM
Lol nice overclock. D:

not too bad

saying it started as a 2200+ @ 1.5 GHZ :D

hullboy
11-13-2006, 03:47 PM
heres my pentium d 930@4.4ghz oc-
http://loader.sc0rian.com/users/public/q384134400mhzd197.jpg
specs-
asus p5wd2 board
intel pentium d 930
patriot pc2-7200 ram

now i have-
asus p5b delxe
pentium d 930 (e6300 tommorow)
patriot pc2-7200 ddr2 900
7900gs@600core/1600mem
seasonic s12 430 watt
i will post a cpu-z oc for the e6300 tommorow

Rafiq_kassam1
11-13-2006, 07:37 PM
hullboy, if you don't mind could you use the latest version of CPU-Z and then post the link here.

Thanks.

~ Download CPU-Z 1.37 ~ (http://www.cpuid.com/cpuz.php)



--------------------

Pentium D 930
Standard 3.0Ghz...overclocked to 4.01GHz
http://valid.x86-secret.com/show_oc?id=137872

Yay, record for me.



Added

Duo Maxwell
11-13-2006, 08:01 PM
Pentium D has a Prescott core, not a Smithfield...and the 900 series is a 65nm process.

Duo Maxwell

Rafiq_kassam1
11-13-2006, 08:09 PM
Pentium D has a Prescott core, not a Smithfield...and the 900 series is a 65nm process.

Duo Maxwell

Okay I will fix that.

infotech1
11-13-2006, 08:14 PM
AMD 64 Single Core


Veince (90nm):

little spelling mistake there

Rafiq_kassam1
11-13-2006, 08:18 PM
AMD 64 Single Core


Veince (90nm):

little spelling mistake there

Okay Venice :D

Stevo
11-14-2006, 12:10 AM
You guys, I need to ask you a question. Do you think this Idea that SlyKilLeR said is a good one? Should I do it? I don't really mind, but will it be useful? That it what I am thinking. I really do not know if it will be that useful as this thread. But if you guys have any opinion if I should/should not do it please tell me. As I don't want to go ahead and do it and then find out it's a total waste. (Wastes my time you know....)

Thanks.

Edit: Or it does not have to necessarily be a Video card OC thread, but rather like a list of Steam members Video cards??? Dunno just thinking.



-----------------



Lol nice overclock. D:
theres no many gfx cards out there, the list would go on and on, then different makes (BFG, PNY etc..) up to you!

cac
11-14-2006, 01:27 AM
hey raq where are the spots for e6700s?

Rafiq_kassam1
11-14-2006, 05:09 AM
hey raq where are the spots for e6700s?

They go in where it says Conroe, but there aren't any e6700 that have been posted so that is why it doesn't show any.

hullboy
11-14-2006, 06:27 AM
heres my e6300 allendale at 3.1ghz/450fsb/mem 450-900 1:1/1.3vcore

http://loader.sc0rian.com/users/public/p1417cpuzvalj197.jpg

@Rafiq_kassam1 sorry the pentium d oc was from a while ago,i dont have it in my machine now.i have the e6300.its not a bad oc for a d930 tho' is it?.

Rafiq_kassam1
11-14-2006, 01:40 PM
heres my e6300 allendale at 3.1ghz/450fsb/mem 450-900 1:1/1.3vcore

http://loader.sc0rian.com/users/public/p1417cpuzvalj197.jpg



Added. BTW: Nice overclock man. Saved you like $200.

JarHag
11-14-2006, 02:48 PM
http://valid.x86-secret.com/show_oc?id=138296

Carver
11-14-2006, 02:51 PM
http://valid.x86-secret.com/show_oc?id=138298
Nothing great. Will go further when I've got better cooling, Orthos reports an error after 10 minutes but SuperPi runs the 1M/32M fine.

EDIT: Guess I'm the first one who posted a OC'ed Windsor X2 3800+ here.

cac
11-14-2006, 02:51 PM
i posted my cpuz in a different tread, maybe ill just post it again in here so you can post it.


it just seems embarrassing that people are hitting 4ghz on an e6600 and i cant get past 3.6stable on my e6700 :(

hullboy
11-14-2006, 04:07 PM
heres a new one-

i got my chip to boot to windows with my chip at 3.5ghz(500fsb) with my ram at 1000mhz 1:1
http://valid.x86-secret.com/show_oc?id=138311
http://loader.sc0rian.com/users/public/x40121cpuz35n197.jpg
is that special or what?.

cac
11-14-2006, 04:18 PM
here you go raq POST ME up there

http://valid.x86-secret.com/show_oc?id=138313


im going to messing around with this for awhile, i left my raming timings really loose for now..

xero273
11-14-2006, 05:37 PM
i posted my cpuz in a different tread, maybe ill just post it again in here so you can post it.


it just seems embarrassing that people are hitting 4ghz on an e6600 and i cant get past 3.6stable on my e6700 :(

eh? Most e6600's top out at 3.2-3.4 GHz. Those that can make it to 4.0 GHz, only can get the CPU-Z screenshot and that's it.

http://valid.x86-secret.com/show_oc?id=138298
Nothing great. Will go further when I've got better cooling, Orthos reports an error after 10 minutes but SuperPi runs the 1M/32M fine.

EDIT: Guess I'm the first one who posted a OC'ed Windsor X2 3800+ here.

Why is your HT mulitplier at 5x?

Rafiq_kassam1
11-14-2006, 08:36 PM
Okay I put all you in, lol I am really tired so I don't know if I made any mistakes, so tell me if I did. Laters

Smity
11-14-2006, 09:29 PM
http://valid.x86-secret.com/show_oc?id=138362

Artem
11-14-2006, 09:30 PM
http://valid.x86-secret.com/show_oc.php?id=100700

Athlon 64 3700+ 2.2 GHz (San Diego) @ 2.8 GHz
Kind of an old CPU... but I don't see the need to upgrade yet

alternated
11-15-2006, 04:17 AM
Here's mine:
http://valid.x86-secret.com/show_oc?id=138422

I have no idea why my RAM shows up as PC2-5300, its definitely 6400.

-Withnail-
11-15-2006, 04:39 AM
I have a 4000+ at 3Ghz, with a 300Mhz FSB.

No CPU-Z though :(

Carver
11-15-2006, 05:47 AM
Why is your HT mulitplier at 5x?
It doesn't go any further.

xero273
11-15-2006, 05:51 AM
It doesn't go any further.

When you are overclocking, you did lower your HT multiplier to 3x? You should also keep the HT speed below 1000.

Carver
11-15-2006, 05:53 AM
When you are overclocking, you did lower your HT multiplier to 3x? You should also keep the HT speed below 1000.
Oh I didn't know this, thanks for pointing it out.

xero273
11-15-2006, 05:58 AM
Oh I didn't know this, thanks for pointing it out.

Your ram might be the limiting factor in your OC. What kind of ram do you have? If that is your max OC, then I would set your HT multiplier to 4x.

Carver
11-15-2006, 06:00 AM
Your ram might be the limiting factor in your OC. What kind of ram do you have? If that is your max OC, then I would set your HT multiplier to 4x.
I've got Transcend PC5300 DDR2 RAM. I've tried several times to go past 2.2ghz, but this would result in unstability.

EDIT: How much MHz is a multiplier of 3x/4x. My motherboard reports it in MHz.

xero273
11-15-2006, 06:05 AM
I've got Transcend PC5300 DDR2 RAM. I've tried several times to go past 2.2ghz, but this would result in unstability.

EDIT: How much MHz is a multiplier of 3x/4x. My motherboard reports it in MHz.

Your HT multiplier will only affect the HT speed. So at your current HT spd of 221, a 3x multiplier will result in a final HT speed of 663 or 4x multiplier will result in 884. You just need to keep in mind to keep your HT speed below 1000. Having it above 1000 will usually cause system instability.

UA 49n50 24e0
11-15-2006, 06:09 AM
i will do so as soon as my mobo arrives :D my E6600 sits in my closet for to long now

getting ASUS P5N32-SLi-E 680i this week I hope

Carver
11-15-2006, 07:12 AM
Your HT multiplier will only affect the HT speed. So at your current HT spd of 221, a 3x multiplier will result in a final HT speed of 663 or 4x multiplier will result in 884. You just need to keep in mind to keep your HT speed below 1000. Having it above 1000 will usually cause system instability.
Okay, I just tried booting @2.3ghz with both 3x and 4x multiplier and it kept being unstable. It didn't read the memory correctly, seeing it as a 512mb stick instead of 1gb and Windows wouldn't boot. Currently it's at 2.25ghz with 4x multiplier.

EDIT: Awww, damn. It just BSOD'ed. Temps were fine, CPU wasn't stressed. It just BSOD'ed. Put it back at 2.2ghz and it's fine now.

Nickyglarge
11-15-2006, 08:07 AM
You have got to love the C2D


http://valid.x86-secret.com/show_oc?id=138477

UA 49n50 24e0
11-15-2006, 08:09 AM
You have got to love the C2D


http://valid.x86-secret.com/show_oc?id=138477

not bad but i think you can push it a bit more :p

alternated
11-15-2006, 08:11 AM
You have got to love the C2D


http://valid.x86-secret.com/show_oc?id=138477

You could increase your overclock by keeping your RAM and FSB at 1:1, not 4:5. I reckon you could get to 3.4ghz at 1:1.

Nickyglarge
11-15-2006, 08:19 AM
not bad but i think you can push it a bit more :p

Probably, but my cpu fan doesnt spin up at this speed, so I dont have to have my volume at a ridicoulus level. you know, the sort of volume that when playing CSS it actually sounds like there is someone in the room with a fully automatic rifle.:)

Nickyglarge
11-15-2006, 08:21 AM
You could increase your overclock by keeping your RAM and FSB at 1:1, not 4:5. I reckon you could get to 3.4ghz at 1:1.

Doesnt that mean my ram would be running at some crazy speed like 1100mhz effective.

UA 49n50 24e0
11-15-2006, 08:22 AM
Probably, but my cpu fan doesnt spin up at this speed, so I dont have to have my volume at a ridicoulus level. you know, the sort of volume that when playing CSS it actually sounds like there is someone in the room with a fully automatic rifle.:)

lmao
i see your point dude

alternated
11-15-2006, 09:10 AM
Doesn't that mean my ram would be running at some crazy speed like 1100mhz effective.

Quite the opposite. What you currently (http://valid.x86-secret.com/show_oc?id=138477) have is a ratio 4:5, where your FSB is at 396mhz, and RAM at 495mhz. Running at 1:1 would mean that your FSB and RAM would both be running at 396mhz, which would put less emphasis on your RAM.

At a ratio of 1:1, you could overclock pretty easily to say 430mhz (430x8 = 3440mhz). This would mean your RAM would be running at a lower frequency than previously (495mhz), but your CPU speed would be higher, which is desirable.

Have a look at my CPU-Z (http://valid.x86-secret.com/show_oc?id=138422) for instance. I've achieved a high FSB clock (442.85x7) with the FSB:RAM ratio at 1:1.

xero273
11-15-2006, 12:03 PM
Okay, I just tried booting @2.3ghz with both 3x and 4x multiplier and it kept being unstable. It didn't read the memory correctly, seeing it as a 512mb stick instead of 1gb and Windows wouldn't boot. Currently it's at 2.25ghz with 4x multiplier.

EDIT: Awww, damn. It just BSOD'ed. Temps were fine, CPU wasn't stressed. It just BSOD'ed. Put it back at 2.2ghz and it's fine now.

It's probably your ram that is limiting you. You could also try increasing your vCore a little to see if that works, but I reread your post and it seems like you are waiting for better cooling before doing anything. Here are some useful programs for you to use. I would use memtest to make sure your ram is stable at those speeds. HCI memtest you can use in Windows. Most people prefer to use Core temp because it gives more accurate readings.

Orthos (http://sp2004.fre3.com/beta/beta2.htm)
MemTest (http://www.memtest.org/)
HCI MemTest (http://hcidesign.com/memtest/)

You could also use these to test stability of CPU or RAM.

For Temp monitoring, are you using the Asus tool? If not, I would use this to monitor temps.

CoreTemp (http://www.thecoolest.zerobrains.com/CoreTemp/)

kingcars66
11-15-2006, 12:23 PM
Alrighty, just bumped up my speed a little. Now running @ 3.4GHz (FSB 425) with the RAM at DDR2 850 5-5-5-15. 1.35 vCore.

http://valid.x86-secret.com/show_oc?id=138539

I tried hitting 450, but it wouldnt boot to Windows. Oh well.

Nickyglarge
11-15-2006, 12:27 PM
Quite the opposite. What you currently (http://valid.x86-secret.com/show_oc?id=138477) have is a ratio 4:5, where your FSB is at 396mhz, and RAM at 495mhz. Running at 1:1 would mean that your FSB and RAM would both be running at 396mhz, which would put less emphasis on your RAM.

At a ratio of 1:1, you could overclock pretty easily to say 430mhz (430x8 = 3440mhz). This would mean your RAM would be running at a lower frequency than previously (495mhz), but your CPU speed would be higher, which is desirable.

Have a look at my CPU-Z (http://valid.x86-secret.com/show_oc?id=138422) for instance. I've achieved a high FSB clock (442.85x7) with the FSB:RAM ratio at 1:1.

Thanks for the info, I will be honest I didnt know that. I thought that setting the memory at anything less than its maximum speed was having it with a multiplier of less than one, but thinking about it now it all makes sense

1:1 FSB to memory - does axactly what it says on the tin!!..

Tested it your way and managed to get it stable around the 3.44 mark, but as i had to up the volts from 1.3 to 1.35 my zalmann fan started spinning up a bit more than i like.

Still, at least I know I have a bit of headroom in the future when I cant afford a new cpu:D

Thanks again