For Help and the HD(Ultra), Mid-end and Low-end Configs Go back to the Main thread here:
http://forums.steampowered.com/forum....php?t=2156747
High-end config v2.1.1:
Code:
//High-end Config v2.1.1 By FusedCore
echo "^1 Loading the High-end Config v2.1.1 by FusedCore..."
//cvar_restart //use this setting to use the games default settings
cvaradd s_lockListener -1; seta s_lockListener 0; echo "^1Setting the Cvar listener to unlock the settings so this game can use the config..."
seta jobs_numThreads 1; echo "^1Setting the threads..." //CPU Threads Use 0-12 for the number of threads your system has. Lower Numbers are better and Use this only if your having Stuttering or hanging.
seta com_videoRam "1024" ; echo "^1Setting the Video memory size..." //sets the Video Card memory Set this to the amount you have in MB
//cvaradd com_synctotime -1; echo "^1Disabling the framelimiter..." //Use this command to disable the 60fps locker
//seta com_maxfps "60"; echo "^1Setting the fps to your settings..." //limits the frames to 60 can be changed to what you desire
seta fc_maxcachememoryMB 1536; echo "^1Setting the File Cache size..." //Increases the default file cache size to completely eliminate the popins
seta image_anisotropy "16"; echo "^1Setting the Ansistropy Filtering..." //Using the highest setting here but you can set as 2, 4 or 8
seta image_usecompression 0; echo "^1Disabling the Image Compression..."
seta image_filter "GL_LINEAR_MIPMAP_LINEAR"; echo "^1Setting the image filtering..."
seta image_blend "GL_LINEAR_MIPMAP_LINEAR"; echo "^1Setting the image blending"
seta image_preload "1"; echo "^1Enabling preloaded Images..."//Use preload images when ever possible
seta image_lodbias "-1"; echo "^1Setting the image LoD..." //LoD settings
seta image_ignoreHighQuality "0"; echo "^1Setting the HQ images..." //Sets up for using HQ gfx
seta image_ignoreLowQuality "1" echo "^1Setting the LQ images..." //ignores the low textures
seta image_useCache "1"; echo "^1Setting the image cache..." //Enabled Cache to allow the textures to load properly without popping
seta image_cacheMegs "1024"; echo "^1Setting the cache maxsize..." //Cache size in Megabytes
seta image_cacheMinK "10"; echo "^1Setting the cache minsize..." //Cache minimum size in kilobytes
seta r_aspectRatio "2"; echo "^1Setting the Aspect Ratio..." // 0=4:3, 1=16:9, 2=16:10, 3=5:4 TFT, -1 custom
seta r_fullscreen "1"; echo "^1Setting the fullscreen option..."
//seta r_customAspectRatioV "10"
//seta r_customAspectRatioH "16"
seta r_swapInterval 1; echo "^1Setting the Vsync option..." //VSYNC 1 enabled, 0 diabled
seta r_useHighQualityPostProcess "1"; echo "^1Setting the HQ post proccessing..." //Fore High Quality post proccessing
seta r_shadowsHighQuality "1"; echo "^1Setting the HQ Shadows..." //Fore High Quality shadows
seta r_displayRefresh "0" //keep it so the engine doesn't double render a frame
seta r_renderer "best" //highest rendering options
seta r_multiSamples "32"; echo "^1Setting the MultiSampling..." //Set this to 16 or 8 if you're having low-fps as 32 is the Max Multi-sampling
seta r_useHBAO "1"; echo "^1Setting the Ambient occlusion..."
seta r_useRenderThread "0" // 0 Disable or 1 Enable threaded rendering useful for newer cards to increase performance.
seta r_visDistMult "1"
seta r_useMotionBlur "1"; echo "^1Setting the Motion Blur..." //use blur
seta r_skipBump "0"
seta r_skipSpecular "0"
seta r_skipNewAmbient "0"
seta r_shadows "1"; echo "^1Setting the Shadows..."
seta r_cgFragmentProfile "best"
seta r_cgVertexProfile "best"
seta vt_lodBias "-1"; echo "^1Setting the Visual Texture LoD..." //LoD settings
//below is cache settings And advanced GFX settings
echo "^1Setting the Textures type..."
seta vt_pageimagesizeuniquediffuseonly2 "8192"
seta vt_pageimagesizeuniquediffuseonly "8192"
seta vt_pageimagesizeunique "8192"
seta vt_pageimagesizevmtr "8192"
seta vt_maxPPF 64; echo "^1Setting the Pages per file..." //Set this to 64 for Quad-cores CPU's or higher, 16 or 8 for dual-cores CPU's
seta vt_preload "1"; echo "^1Setting the Visual Textures to Preload..."
//Begin Advanced GFX Filtering and Sharper Images. Comment these 3 lines out if you are having issues or don't like the way it looks.
echo "^1Setting the Visual Texture Filters"
//seta vt_filter "GL_NEAREST, GL_NEAREST_MIPMAP_LINEAR"
seta vt_envf "GL_TEXTURE_ENV, GL_TEXTURE_ENV_MODE, GL_MODULATE"
seta vt_blend "GL_LINEAR_MIPMAP_LINEAR"
//End of Advanced GFX Filtering
seta vt_useCache "1"; echo "^1Setting the Visual texture cache..."
seta vt_cacheMegs "1024"; echo "^1Setting the cache maxsize..."
seta vt_cacheMinK "10"; echo "^1Setting the cache minsize..."
seta vt_ignoreHighQuality "0"; echo "^1Setting the HQ Visual Texture..."
seta vt_ignoreLowQuality "1"; echo "^1Setting the LQ Visual Texture..."
echo "Setting Advanced detailing"
seta g_showPlayerShadow "1"
seta r_showGlobalShadows "1"
seta r_showDimShadows "1"
seta r_showAmbientLighting "1"
seta r_showDynamic "1"
seta r_showEdges "1"
seta r_showEnvs "1"
seta r_showShadows "1"
seta r_showBlendedLights "1"
seta r_showBlendedSurfOverdraw "1"
seta r_showBuffers "1"
seta r_showCommits "1"
seta r_showCracks "1"
seta r_showDepth "1"
seta r_showDestinationAlpha "1"
seta r_showDetailNodeBounds "1"
echo "...Advanced detailing Set"
//Change these to 0 Disable or 1 Enable
seta r_skipAddAlways "0"
seta r_skipAnalyze "0"
seta r_skipAreaCPUCulling "0"
seta r_skipAreaGPUCulling "0"
seta r_skipAugment "0"
seta r_skipAutosprites "0"
seta r_skipBaseSurfaces "0"
seta r_skipBeams "0"
seta r_skipBlendedSurfaces "0"
seta r_skipBlendLights "0"
seta r_skipCloth "0"
seta r_skipCommits "0"
seta r_skipDecals "0"
seta r_skipDetailModels "0"
seta r_skipDetailTris "0"
seta r_skipDimShadows "0"
seta r_skipDistortionSurfaces "0"
seta r_skipDynamic "0"
seta r_skipDynamicLighting "0"
seta r_skipEffects "0"
seta r_skipEmissiveGlare "0"
seta r_skipFeedback "0"
seta r_skipFlares "0"
seta r_skipFoliage "0"
seta r_skipGeneratedFileCheck "0"
seta r_skipGlare "0"
seta r_skipGuis "0"
seta r_skipLightCPUCulling "0"
seta r_skipLightGPUCulling "0"
seta r_skipLights "0"
seta r_skipMergeMeshes "0"
seta r_skipModelCPUCulling "0"
seta r_skipModelGPUCulling "0"
seta r_skipModelRangeCulling "0"
seta r_skipModels "0"
seta r_skipNodeCPUCulling "0"
seta r_skipNodeGPUCulling "0"
seta r_skipOcclusionBaseModel "0"
seta r_skipParticles "0"
seta r_skipSlowLights "0"
seta r_skipStripDeadCode "0"
seta r_skipSuppress "0"
seta r_skipSurfaceCPUCulling "0"
seta r_skipTransparencySort "0"
seta r_skipUpdateInView "0"
seta r_skipViewParms "0"
seta r_skipVmtrs "0"
seta r_skipWaterSurfaces "0"
seta r_skipWorld "0"
seta r_skipZCullReconstruct "0"
echo "...Advanced IO Objects set"
seta vt_maxaniso 4; echo "^1Setting the Visual Texture anisotropy..." //Set this to 0 if your having lots screen tarring issues and do NOT set this higher then 4 otherwise it will corrupt the Mega-Textures
echo "^1-If you Have seen NO Unknowns above this line then it has all been Loaded without errors-"
echo "^1 ...High-end Config v2.1.1 by FusedCore Loaded, Enjoy the game!!!"
-FusedCore