Game crashing in Tai Yung Medical Center

kara_bulut · 08-28-2011, 12:53 AM

In the part where you're supposed to get past the lasers and get in the elevator to go to the data base.

Well every time I step into the elevator the game crashes with this error.

A fatal error has occured while playing Deus Ex : Human Revolution
Please refer to the ReadMe file for information which might help you
solve this problem, or contact Square Enix customer support

Extented Information :
out of instances, maximum is 2560 - contact a designer. If you are one, contact a programmer

It looks like a engine problem to me but no matter what I do I haven't been able to fix it.
And since contacting customer support is outright stupid as they will say restart you PC etc which I've already done prior to contacting them I was hoping you guys can help.

PC specs

Intel i5 3.33
Nvidia GTX 465
4 GB Ram
Win 7 32-bit

Also trying to launch the game without dx11 also crashes it.

08-28-2011, 06:06 PM

The same thing happens to me.

People say it is possible to get through there by disabling the lasers. But how does one do that? Security terminal only offers turning the camera off... Does one need ability to control turrets or something?

anticitizen101 · 08-28-2011, 06:26 PM

There are two laser control panels. One inside the security room on the wall near the vent, and one on a pillar near the elevator door.

I mean, seriously. It's how you've been disabling lasers so far. Reality check please.

08-29-2011, 08:06 AM

It is just that I did not read the first message carefully enough... The thing I get this error just before the core database room when trying to get into ventilation shaft. This shaft is the end point of that room with a lot of moving lasers. And they are not ordinary ones that you can hack through.

alternated · 08-29-2011, 08:15 AM

I experienced this yesterday.

Quote:

I've had a look on the Eidos forums and found this post:

I was able to avoid getting the error after disabling the laser system in the room from the nearby console. Not sure if that did the real trick there but it's worth a try if someone gets this one too.

I'm going to try that out as a solution.

That worked for me. I simply walked into one of the laser beams and then walked into the elevator.

kara_bulut · 08-29-2011, 09:11 AM

Yes I forgot to reply back here.

Disabling the laser gets rid of the crash.

08-28-2011, 12:53 AM	#1
kara_bulut Join Date: May 2008 Reputation: 707 Posts: 7,051	Game crashing in Tai Yung Medical Center In the part where you're supposed to get past the lasers and get in the elevator to go to the data base. Well every time I step into the elevator the game crashes with this error. A fatal error has occured while playing Deus Ex : Human Revolution Please refer to the ReadMe file for information which might help you solve this problem, or contact Square Enix customer support Extented Information : out of instances, maximum is 2560 - contact a designer. If you are one, contact a programmer It looks like a engine problem to me but no matter what I do I haven't been able to fix it. And since contacting customer support is outright stupid as they will say restart you PC etc which I've already done prior to contacting them I was hoping you guys can help. PC specs Intel i5 3.33 Nvidia GTX 465 4 GB Ram Win 7 32-bit Also trying to launch the game without dx11 also crashes it.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

08-28-2011, 06:06 PM	#2
IAmEternaL Guest Posts: n/a	The same thing happens to me. People say it is possible to get through there by disabling the lasers. But how does one do that? Security terminal only offers turning the camera off... Does one need ability to control turrets or something?

08-28-2011, 06:26 PM	#3
anticitizen101 Join Date: Jul 2010 Reputation: 50 Posts: 916	There are two laser control panels. One inside the security room on the wall near the vent, and one on a pillar near the elevator door. I mean, seriously. It's how you've been disabling lasers so far. Reality check please.

08-29-2011, 08:06 AM	#4
IAmEternaL Guest Posts: n/a	It is just that I did not read the first message carefully enough... The thing I get this error just before the core database room when trying to get into ventilation shaft. This shaft is the end point of that room with a lot of moving lasers. And they are not ordinary ones that you can hack through.

08-29-2011, 09:11 AM	#6
kara_bulut Join Date: May 2008 Reputation: 707 Posts: 7,051	Yes I forgot to reply back here. Disabling the laser gets rid of the crash.