Go Back   Steam Users' Forums > Steam Game Discussions > T - Z > Team Fortress 2

Reply
 
Thread Tools Display Modes
Old 12-04-2012, 02:49 PM   #1
Melonbax
 
Join Date: Aug 2012
Reputation: 1
Posts: 56
Dead ringer issues

So in tf2 when i hold up my deadringer the cloak bar is empty and when it starts draining the cloak while in active form its drains the wrong way. It might be my config idk but i tried uninstalling my hud but to no use
Chris's Config
// Unexplained crashes? Try changing mat_queue_mode to `-1'.
// ----------------------------------------------------------------------------
// Chris' highframes config, designed to get you a large performance boost
// v2.010 | 26 August 2012 | fakkelbrigade.eu/chris/configs/
// ----------------------------------------------------------------------------
// Problems or questions? Contact me at #christf2 on QuakeNet.
// ----------------------------------------------------------------------------
// Launch options:
// IMPORTANT: Remove -dxlevel 81 from the launch options after the first launch!
//
// Fullscreen: -dxlevel 81 -full -w WIDTH -h HEIGHT -console -novid -useforcedmparms -noforcemaccel -noforcemspd
// Windowed: -dxlevel 81 -sw -w WIDTH -h HEIGHT -console -noborder -novid -useforcedmparms -noforcemaccel -noforcemspd
// ----------------------------------------------------------------------------

// ----------------------------------------------------------------------------
// FPS cap
// ----------------------------------------------------------------------------
// The primary benefit of an FPS cap is to make the FPS more stable, other than
// that, it doesn't do a lot. A moderate, consistent framerate is much more
// desirable than a variable but sometimes high framerate. A common
// misconception is that if any more frames are generated than your monitor can
// display, they are useless. This is wrong -- frames are used for much more
// than mere display, and affect the way the game feels well past your
// refresh rate.
//
// This FPS cap should *always* be set to a value higher than `cl_cmdrate' in
// any case, or the discrepancy between clientside frame generation and frames
// to be sent to the server will no doubt cause you many a headache, especially
// when it comes down to hit registration. Other than that, I recommend
// for everyone to use the value `132' (2*66), as long as you can generally
// keep that value stable without regular drops.
// ----------------------------------------------------------------------------
cl_showfps 1 // Show unsmoothed FPS meter
//fps_max 132 // Commented due to 2011-09-02 update causing jittering when fps is capped for some
fps_max 0

// ----------------------------------------------------------------------------
// Net settings
// ----------------------------------------------------------------------------
// Whilst net settings perhaps aren't an integral part of an FPS config, they
// are a fact of life in competitive TF2, and as such, they are included here.
//
// A common question I am asked -- what defines whether a good connection is
// good or bad? Mostly personal preference. If you're not willing to make the
// choice, try both and see which is better for you.
//
// Generally, meeting both of the following conditions would classify it as a
// good connection:
//
// - Ping of <80 to the average server you join
// - Generally no/negligible choke/loss (can be checked with `net_graph')
//
// There's some pretty good documentation on this here:
// http://developer.valvesoftware.com/w...yer_Networking
//
// Uncomment (remove the `//' from) one of the groups if you want to use them.
// ----------------------------------------------------------------------------

// Good connection
//cl_cmdrate 66
//cl_interp 0
//cl_interp_ratio 1
//cl_lagcompensation 1
//cl_pred_optimize 2
//cl_smooth 0
//cl_smoothtime 0.01
//cl_updaterate 66
//rate 60000

// Bad connection
cl_cmdrate 40
cl_interp 0
cl_interp_ratio 2
cl_lagcompensation 1
cl_pred_optimize 2
cl_smooth 0
cl_smoothtime 0.01
cl_updaterate 40
rate 35000

// ----------------------------------------------------------------------------
// Sprays
// ----------------------------------------------------------------------------
// Bear in mind that these are disabled on war servers due to `sv_pure 2'
// anyway, so if you play competitive TF2, this won't help you.
// ----------------------------------------------------------------------------

// Disable sprays
cl_playerspraydisable 1
r_spray_lifetime 0

// Enable sprays -- uncomment this section if you want these settings
cl_playerspraydisable 0
r_spray_lifetime 2

// ----------------------------------------------------------------------------
// Shadows
// ----------------------------------------------------------------------------

// Disable shadows
mat_shadowstate 0
r_shadowmaxrendered 0
r_shadowrendertotexture 0
r_shadows 0

// Enable shadows -- uncomment this section if you want these settings
mat_shadowstate 1
r_shadowmaxrendered 11
r_shadowrendertotexture 1 // Non-blobby shadows. Sometimes turned on by
// competitive TF2 players to see opponents standing
// near the other side of a wall. You may see some
// performance loss from setting this to `1'.
//r_shadows 1

// ----------------------------------------------------------------------------
// Facial features
// ----------------------------------------------------------------------------

// Disable facial features
r_eyes 0
r_flex 0
r_lod 2
r_rootlod 2
r_teeth 0

// Enable facial features -- uncomment this section if you want these settings
r_eyes 1
r_flex 1
r_lod 1 // Needs to be set to 1, otherwise they will still be disabled.
r_rootlod 1
r_teeth 1

// ----------------------------------------------------------------------------
// Ragdolls
// ----------------------------------------------------------------------------
// You will have reduced performance on deaths which produce ragdolls.
// ----------------------------------------------------------------------------

// Disable ragdolls
cl_ragdoll_fade_time 0
cl_ragdoll_forcefade 1
cl_ragdoll_physics_enable 0
g_ragdoll_fadespeed 0
g_ragdoll_lvfadespeed 0
ragdoll_sleepaftertime 0

// Enable ragdolls -- uncomment this section if you want these settings
cl_ragdoll_fade_time 15
cl_ragdoll_forcefade 0
cl_ragdoll_physics_enable 1
g_ragdoll_fadespeed 600
g_ragdoll_lvfadespeed 100
ragdoll_sleepaftertime "5.0f"

// ----------------------------------------------------------------------------
// Gibs
// ----------------------------------------------------------------------------
// You will have reduced performance on deaths which produce gibs.
// ----------------------------------------------------------------------------

// Disable gibs
cl_phys_props_enable 0
cl_phys_props_max 0
props_break_max_pieces 0
r_propsmaxdist 1
violence_agibs 0
violence_hgibs 0

// Enable gibs -- uncomment this section if you want these settings
cl_phys_props_enable 1
cl_phys_props_max 128
props_break_max_pieces -1
r_propsmaxdist 1000
violence_agibs 1
violence_hgibs 1

// ----------------------------------------------------------------------------
// Graphical
// ----------------------------------------------------------------------------
// Now we come to the main brunt of the config. You probably don't want to mess
// with this.
// ----------------------------------------------------------------------------
cl_detaildist 0
cl_detailfade 0
cl_drawmonitors 0
cl_ejectbrass 0
cl_new_impact_effects 0
cl_show_splashes 0
func_break_max_pieces 0
glow_outline_effect_enable 0 // Cart glow effect.
lod_transitiondist 0
mat_antialias 0
mat_bumpmap 1 // Controls bumpmapping. Setting this to 0 on dx9 will cause
// a strange `shine' effect to appear on all players.
mat_colcorrection_disableentities 1
mat_colorcorrection 0
mat_disable_bloom 1
mat_disable_fancy_blending 1
mat_disable_lightwarp 1
mat_envmapsize 8
mat_envmaptgasize 8
mat_filterlightmaps 1
mat_filtertextures 1
mat_forceaniso 1
mat_hdr_level 0
mat_max_worldmesh_vertices 512
mat_monitorgamma 2.0 // Controls brightness, try 1.8 to make it brighter or 2.2
// to get it darker. Only works in fullscreen.
mat_motion_blur_enabled 0
mat_parallaxmap 0
mat_picmip 1 // Higher = more mipmapping. Without `sv_cheats 1', you're looking
// at a range from -1 to 2, -1 being the best quality, 2 being the
// worst.
mat_reducefillrate 1
mat_reduceparticles 1
mat_specular 1 // Controls specularity. Setting this to 0 will make ubers
// non-shiny, and will remove some specular effects from in-game
// entities which support it. Setting this to 1 on dx8 will
// result in some strange `fire' textures replacing their
// appropriate counterparts, especially on medals, and certain
// hats.
mat_trilinear 1
mat_wateroverlaysize 1
mp_decals 9 // `9' is a good value to still see the spread pattern from a
// scattergun without any real performance loss.
r_3dsky 0
r_ambientboost 0
r_ambientfactor 0
r_ambientmin 0
r_avglight 0
r_cheapwaterend 1
r_cheapwaterstart 1
r_decals 9
r_decalstaticprops 0
r_decal_cullsize 15
r_drawdetailprops 0
r_drawmodeldecals 0
r_drawflecks 0
r_dynamic 0
r_flashlightdepthtexture 0
r_forcewaterleaf 1
r_lightaverage 0
r_maxnewsamples 2
r_maxsampledist 1
r_propsmaxdist 0
r_renderoverlayfragment 0
r_staticprop_lod 4
r_waterdrawreflection 0
r_waterdrawrefraction 1
r_waterforceexpensive 0
r_waterforcereflectentities 0
rope_averagelight 0
rope_collide 0
rope_rendersolid 0
rope_shake 0
rope_smooth 0
rope_subdiv 0
rope_wind_dist 0
tf_particles_disable_weather 1 // Disable weather effects on maps supporting
// it, for example, setting this to `1'
// disables rain effects on *_sawmill.
tracer_extra 0
violence_ablood 1
violence_hblood 1

// ----------------------------------------------------------------------------
// Misc
// ----------------------------------------------------------------------------
in_usekeyboardsampletime 0
mat_clipz 1 // FX card users should set this to 0
mat_forcehardwaresync 0
mat_levelflush 1
//m_rawinput 1 // Turn on raw mouse input. Commented out by default due to
// silly incompatibility with the Xfire overlay. You should use
// it if you can!
mat_vsync 0 // Turn off vsync to avoid nasty I/O latency.
r_fastzreject -1 // Values >1 enable a fast Z rejection algorithm, to be
// performed on the GPU (as opposed to on the CPU). The
// value `-1' autodetects hardware support for this
// feature, which is safer than forcing it.

// ----------------------------------------------------------------------------
// Sound
// ----------------------------------------------------------------------------
// I'd be hesitant to say that you would see a great deal of performance
// improvement from lowering the sound quality, but in my experience as a
// competitive TF2 player, lowering the sound quality makes determination of
// directionality and distance that much easier. You may see a small FPS gain
// with these settings, or you may not, either way will likely have a
// negligible effect on performance.
// ----------------------------------------------------------------------------
dsp_enhance_stereo 0
dsp_slow_cpu 1
snd_async_fullyasync 1 // Having the sound run fully asynchronous has been
// helpful in the past, as it seems to (for whatever
// reason) reduce the number of TDRs experienced during
// gameplay. There's some pretty good information on
// TDRs (nerds only) here:
// http://forums.nvidia.com/index.php?showtopic=65161
snd_pitchquality 0
snd_spatialize_roundrobin 1

// ----------------------------------------------------------------------------
// Threading
// ----------------------------------------------------------------------------
mat_queue_mode 2 // mat_queue mode is another frequently asked about cvar, it
// defines the threading method to be used by the material
// system. It has been unstable to use in the past, but
// nowadays it's generally okay.
//
// Here are the possible values:
// -2 legacy default
// -1 default
// 0 synchronous single thread
// 1 queued single thread
// 2 queued multithreaded
//
// If you have problems with the value `2', try setting it to
// `-1'.
//
// As an aside, there are quite a few bugs in the demo system
// that occur when mat_queue_mode is set to a value that is
// not `-1'. If you intend to do work with the demo system,
// maybe you should change this.

cl_threaded_bone_setup 0
cl_threaded_client_leaf_system 0
r_queued_decals 0
r_queued_ropes 1
r_queued_post_processing 0
r_threaded_client_shadow_manager 1
r_threaded_particles 1
r_threaded_renderables 1

// ----------------------------------------------------------------------------
// Misc
// ----------------------------------------------------------------------------
cl_forcepreload 1 // Force preloading

// ----------------------------------------------------------------------------
// Print to console
// ----------------------------------------------------------------------------
echo "-------------------------------------------------------"
echo " Chris' highframes config loaded. "
echo "-------------------------------------------------------"
echo "Please direct all comments/queries/whatnot to"
echo "#christf2 on QuakeNet."
Melonbax is offline  
Reply With Quote
Old 12-04-2012, 02:54 PM   #2
ChaoSynergy
 
 
 
Join Date: Oct 2007
Reputation: 381
Posts: 2,278
Valve fudged and switched the background and foreground vtfs around for the cloak meter.
ChaoSynergy is offline   Reply With Quote
Old 12-04-2012, 02:58 PM   #3
discrider
 
 
 
Join Date: Aug 2008
Reputation: 787
Posts: 4,466
New bug: http://forums.steampowered.com/forum....php?t=3023805
discrider is offline   Reply With Quote
Old 12-04-2012, 02:58 PM   #4
Salamander F2
 
 
 
Join Date: Oct 2011
Reputation: 296
Posts: 814
I just started getting this after the most recent update. Also, backpack icons for equipped items are really weird.
Salamander F2 is offline   Reply With Quote
Reply

Go Back   Steam Users' Forums > Steam Game Discussions > T - Z > Team Fortress 2


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is Off
HTML code is Off



All times are GMT -7. The time now is 05:31 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
Site Content Copyright Valve Corporation 1998-2012, All Rights Reserved.